RADISYS EXP-BP3A EXPBP3A工控DCS系統
1.產 品 資 料 介 紹:
中文資料:
流氓數據包刪除操作流氓數據包是指不屬于網絡上任何節點的數據包。回憶反射內存的基本操作,一個節點在網絡上發起一個數據包RADISYS EXP-BP3A EXPBP3A,以響應來自主機的內存寫入。數據包在網絡周圍傳輸到所有節點,直到它返回到始發節點。然后,始發節點需要將分組從網絡中移除。
然而,如果數據包在通過另一個節點時以某種方式被更改,或者如果始發節點開始出現故障,則始發節點可能無法將數據包識別為自己的數據包,RADISYS EXP-BP3A EXPBP3A并且不會將數據包從網絡中移除。在這種情況下,數據包將繼續在網絡中傳遞。
流氓包極為罕見。它們的存在表明,由于真正的組件故障或在惡劣環境中操作,導致了板故障。通常情況下,解決方案是隔離和更換故障板和/或改善環境。然而,一些用戶更喜歡容忍零星的流氓數據包,而不是在流氓數據包從網絡中刪除的情況下停止系統進行維護。RADISYS EXP-BP3A EXPBP3A
英文資料:
Rogue Packet Remove Operation A rogue packet is a packet that does not belong to any node on the network. Recalling the basic operation RADISYS EXP-BP3A EXPBP3Aof Reflective Memory, one node originates a packet on the network in response to a memory write from the host. The packet is transferred around the network to all nodes until it returns to the originating node. It is then a requirement of the originating node to remove the packet from the network.RADISYS EXP-BP3A EXPBP3A
If, however, the packet somehow gets altered as it passes through another node or if the originating node begins to malfunction, then the RADISYS EXP-BP3A EXPBP3Aoriginating node may fail to recognize the packet as its own and will not remove the packet from the network. In this case the packet will continue to pass around the network.
Rogue packets are extremely rare. Their existence indicates a malfunctioning board due to true component failure or due to operation in an harsh environment. Normally, the solution is to isolate and replace the malfunctioning board and/or improve the environment. However, some users prefer to tolerate sporadic rogue packets rather than halt the system for maintenance provided the rogue packets are removed from the network.RADISYS EXP-BP3A EXPBP3A
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn