GE V7769-SDK-LNX-B數字量輸入卡件
1.產 品 資 料 介 紹：
中文資料：
GE V7769-SDK-LNX-B使用此功能時，起動機狀態開關輸入必須來自通用控制
觸點或并聯組合的輔助“a”觸點或串聯組合的輔助
“b”觸點來自降壓接觸器和全電壓接觸器。一次轉換
469假設電機仍在GE V7769 SDK LNX Bleast下運行2秒。這樣可以防止
GE V7769-SDK-LNX-B在開路過渡期間，如果電機電流變為零，則不會識別額外啟動。
設定值第3頁已指定為數字輸入頁面。469有九個數字輸入。
GE V7769-SDK-LNX-B數字輸入中的五個已預先分配為具有特定功能的開關。五個中的四個
預先分配的數字輸入始終起作用，并且沒有任何與
通用電氣V7769-SDK-LNX-B
第五個，啟動器狀態，可以配置為“a”或“b”輔助觸點。剩下的四個
數字輸入是可分配的；也就是說，輸入所用于的功能可以從
不同功能的數量。其中一些功能非常具體，其他功能可能經過編程以適應
符合用戶要求。如果啟用雙速電機功能，ASSIGNABLE INPUT 4（可分配輸入4）將專用
作為雙速電機監控器。GE V7769-SDK-LNX-B
英文資料：
GE V7769-SDK-LNX-B this feature is used, the Starter Status Switch input must be either from a common control contact or a parallel combination of Auxiliary ‘a’ contacts or a series combination of Auxiliary ‘b’ contacts from the reduced voltage contactor and the full voltage contactor. Once transition is initiated, the 469 assumes the motor is still running for at GE V7769-SDK-LNX-Bleast 2 seconds. This prevents the GE V7769-SDK-LNX-B from recognizing an additional start if motor current goes to zero during an open transition.
Setpoints page 3 has been designated the DIGITAL INPUTS page. The 469 has nine digital inputs. Five of the GE V7769-SDK-LNX-B digital inputs have been pre-assigned as switches having a specific function. Four of the five pre-assigned digital inputs are always functional and do not have any setpoint messages associated with them.GE V7769-SDK-LNX-B
The fifth, Starter Status, may be configured for either an 'a' or 'b' auxiliary contact. The remaining four digital inputs are assignable; that is to say, the function that the input is used for may be chosen from one of a number of different functions. Some of those functions are very specific, others may be programmed to adapt to the user requirements. If the Two-Speed Motor feature is enabled, ASSIGNABLE INPUT 4 will be dedicated as the Two-Speed Motor Monitor.GE V7769-SDK-LNX-B
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
