ABB YPO105E YT204001-FR工控控制卡件優勢供應

1.產      品      詳      情      資      料：   

使用OLED菜單功能檢查IP地址。有關默認IP地址和其他詳細信息，請參閱建立初始以太網通信，第3.4.1.節。需要CAT 5電纜（或更高級）才能在100/1000BaseT局域網中正常工作。引腳排列為：在綠色上已建立相應的鏈接。在相應端口檢測到閃爍的綠色流量。關閉在相應端口未建立連接。鏈路速度（較低）打開綠色相應數據速度為1 Gbps或100 Mbps。非對應網絡數據速度為10Mbps現場代理CPE400下側的嵌入式現場代理（EFA）端口（圖3）是一個專用于現場代理功能的以太網端口。顯示了一個典型的現場代理應用程序，其中CPE400嵌入式現場代理的作用是在本地收集數據，然后通過EFA端口將選定的數據安全傳輸到Predix Cloud。PACSystems RX3i保持對CPE400上剩余以太網端口及其串行端口的控制

Use the OLED menu function to check the IP Address. For default IP Address and other details, refer to Establishing Initial Ethernet Communications, Section 3.4.1. CAT 5 cables (or superior) are required for proper operation with 100/1000BaseT LANs. The pin arrangements are:On Green The corresponding link has been established. Blinking Green Traffic is detected at the corresponding port. Off No connection established at corresponding port. Link Speed (lower) On Green Corresponding data speed is 1 Gbps or 100 Mbps. Off Corresponding network data speed is 10 Mbps Field Agent The Embedded Field Agent (EFA) port on the underside of CPE400 (Figure 3) is an Ethernet port dedicated to the Field Agent functionality.shows a typical Field Agent application, in which the role of the CPE400 Embedded Field Agent (EFA) is to gather data locally, then securely transfer selected data to the Predix Cloud via the EFA port. The PACSystems RX3i maintains control over the remaining Ethernet ports on the CPE400, as well as its serial port

2.今      日      產      品      展      示      

3.   主      營      品      牌    

本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn