TRICONEX 4351A使用參數工控控制卡件

1.產      品      詳      情      資      料：   

TRICONEX 4351A是一種高可靠性的安全控制器，通常用于工業自動化應用中，以下是該產品的特點、使用方法以及參數規格的介紹：

特點：

1. 高可靠性：TRICONEX 4351A采用三重容錯技術，可以提供最高級別的可靠性，確保工業自動化系統的安全性。
2. 大容量：該產品具有高達2048個I/O點的容量，適用于大規模工業自動化系統。
3. 可擴展性：TRICONEX 4351A支持模塊化擴展，可根據具體應用需要靈活配置。
4. 先進的自診斷功能：該產品具有自診斷功能，能夠自動檢測系統中的故障，并及時采取措施。
5. 安全性：TRICONEX 4351A符合各種工業安全標準，能夠確保工業自動化系統的安全性。

使用方法：

1. 安裝控制器：將TRICONEX 4351A安裝到控制箱中，并連接所需的傳感器和執行器等設備。
2. 配置參數：通過軟件界面配置控制器的參數，包括輸入/輸出點的配置、安全邏輯的設置等。
3. 測試系統：在系統正式投入使用之前，需要進行一系列測試，包括設備的自檢、模擬運行等。
4. 運行系統：在測試通過后，系統即可正式投入運行，TRICONEX 4351A會不斷監測系統運行狀況，并及時采取措施，確保系統的安全性。

參數規格：

1. I/O點數：最多支持2048個I/O點。
2. 支持的通信協議：Modbus、Modbus TCP/IP、HART等。
3. 工作電壓范圍：AC 85-264V或DC 20-32V。
4. 工作溫度范圍：-20℃~60℃。
5. 安全等級：符合IEC 61508 SIL 3和EN 954-1 Category 4等標準

TRICONEX 4351A is a highly reliable safety controller, which is usually used in industrial automation applications. The following is the introduction of the product's features, use methods and parameter specifications:

characteristic:

High reliability: TRICONEX 4351A adopts triple fault-tolerant technology, which can provide the highest level of reliability and ensure the safety of industrial automation system.

Large capacity: This product has a capacity of up to 2048 I/O points, and is suitable for large-scale industrial automation systems.

Scalability: TRICONEX 4351A supports modular expansion and can be flexibly configured according to specific application needs.

Advanced self-diagnosis function: this product has self-diagnosis function, which can automatically detect the fault in the system and take measures in time.

Safety: TRICONEX 4351A meets various industrial safety standards and can ensure the safety of industrial automation systems.

usage method:

Install the controller: install the TRICONEX 4351A into the control box, and connect the required sensors, actuators and other equipment.

Configuration parameters: configure the parameters of the controller through the software interface, including the configuration of input/output points, the setting of safety logic, etc.

Test system: before the system is officially put into use, a series of tests need to be carried out, including equipment self-inspection, simulation operation, etc.

Operation system: After the test is passed, the system can be put into operation formally. TRICONEX 4351A will continuously monitor the system operation and take timely measures to ensure the system safety.

Parameter specification:

I/O points: up to 2048 I/O points are supported.

Supported communication protocols: Modbus, Modbus TCP/IP, HART, etc.

Working voltage range: AC 85-264V or DC 20-32V.

Working temperature range: - 20 ℃~60 ℃.

Safety level: comply with IEC 61508 SIL 3 and EN 954-1 Category 4

2.產      品      展      示      

3.公      司      優      勢     主      營      產      品

4.相      關      產     品      展      示

本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn