IGCT可控硅5SHX1960L0004模塊化發展

SIE中的控制器標簽。DATA保存要在處理器和MVI56E-SIE模塊。此讀寫數據在處理器之間傳輸和模塊為“頁面”或塊，數據長度不超過200個字。SIE.data的數據類型。ReadData和SIE.DATA。WriteData控制器標記數組是包含可變?cè)財?shù)的整數數組。SIE.DATA.讀取數據ReadData是一個控制器標記數組，可自動調整以匹配輸入的值在配置的讀取寄存器計數（第35頁）參數中。為了便于使用，這個數組應該是200個單詞的倍數。此數據翻至從模塊到處理器，每次200字。梯形圖邏輯放置數據

接收到ReadData數組中的正確位置。此數據用于狀態和處理器梯形圖邏輯中的控制。

ReadData數組與模塊的ReadData區域的內容相關內部數據庫。要查看模塊內部數據庫中的實際寄存器，請?jiān)L問從ProSoft Configuration Builder的診斷菜單中顯示數據庫。更多信息，請參閱PCB Diagnostics WriteData部分，它是一個控制器標記數組，可自動調整以匹配輸入的值在配置的寫入寄存器計數（第36頁）參數中。為了便于使用，這個數組應該是200個單詞的倍數。此數據上翻至從處理器到模塊，每次200字。梯形圖邏輯將寫入數據傳輸?shù)捷敵鰣D像以傳輸?shù)侥K。此數據從處理器向模塊發送狀態和控制信息，以便在上的其他節點中使用網絡WriteData數組與模塊的“寫入數據”區域的內容相關內部數據庫。

要查看模塊內部數據庫中的實際寄存器，請?jiān)L問從ProSoft Configuration Builder的診斷菜單中顯示數據庫。更多信息，請參閱PCB診斷診斷和故障排除部分

該模塊提供以下診斷和故障排除信息

形式：

? 模塊前面的LED狀態指示燈提供有關模塊的信息地位

? 模塊中包含的狀態數據可以在ProSoft Configuration Builder中查看通過以太網端口。

? 狀態數據值從模塊傳輸?shù)教幚砥鳌?br/>

The controller tags in SIE.DATA hold data to be transferred between the processor and

the MVI56E-SIE module. This read and write data is transferred between the processor

and module as "pages," or blocks, of data up to 200 words long.

The data types for the SIE.DATA.ReadData and SIE.DATA.WriteData controller tag

arrays are integer arrays containing variable numbers of elements. 

SIE.DATA.ReadData

ReadData is a controller tag array that automatically adjusts to match the value entered

in the Read Register Count (page 35) parameter of the configuration. For ease of use,

this array should be dimensioned as a multiple of 200 words. This data is paged up to

200 words at a time from the module to the processor. The ladder logic places the data

received into the proper position in the ReadData array. This data is used for status and

control in the processor ladder logic.

The ReadData array is related to the contents of the Read Data area of the module's

internal database. To view the actual registers in the module's internal database, access

the database display from ProSoft Configuration Builder's Diagnostics menu. For more

information, see the section on PCB Diagnostics WriteData is a controller tag array that automatically adjusts to match the value entered

in the Write Register Count (page 36) parameter of the configuration. For ease of use,

this array should be dimensioned as a multiple of 200 words. This data is paged up to

200 words at a time from the processor to the module. The ladder logic places the write

data into the output image for transfer to the module. This data is passed from the

processor to the module for status and control information for use in other nodes on the

network.The WriteData array is related to the contents of the Write Data area of the module's

internal database. To view the actual registers in the module's internal database, access

the database display from ProSoft Configuration Builder's Diagnostics menu. For more

information, see the section on PCB Diagnostics Diagnostics and Troubleshooting

The module provides information on diagnostics and troubleshooting in the following

forms:

? LED status indicators on the front of the module provide information on the module’s

status.

? Status data contained in the module can be viewed in ProSoft Configuration Builder

through the Ethernet port.

? Status data values are transferred from the module to the processor.