NI PXI-6284高性能多通道數據采集卡
1.產 品 資 料 介 紹:
中文資料:
NI PXI-6284是一款高性能多通道數據采集卡,是National Instruments(NI)的產品之一。下面是關于NI PXI-6284的產品特點介紹、使用方法以及參數詳情:
產品特點介紹:
- 多通道數據采集:NI PXI-6284具有16個模擬輸入通道和24個數字I/O通道,可實現高密度數據采集和控制。
- 高采樣率和精度:該采集卡提供的最大采樣率為1.25 MS/s(每秒采樣次數),并且具有16位的模擬輸入分辨率,可實現精確的數據采集。
- 靈活的觸發和定時功能:NI PXI-6284支持多種觸發模式和定時功能,可根據應用需求進行靈活配置和控制。
- 嵌入式同步和多卡同步:該采集卡支持PXI總線的同步功能,可與其他PXI設備進行同步操作,實現多通道和多卡系統的同步采集。
- 高速數據傳輸和大容量存儲:NI PXI-6284通過高速數據總線實現快速數據傳輸,同時具備大容量存儲器,可應對大量數據采集和處理需求。
使用方法:
- 安裝硬件:將NI PXI-6284插入支持PXI總線的主機機箱的插槽中,并確保連接適當的電源和信號線。
- 安裝驅動和軟件:安裝NI提供的適用于PXI-6284的驅動程序和開發環境,如NI-DAQmx和LabVIEW。
- 配置采集參數:使用驅動程序或開發環境進行配置,包括選擇采樣率、通道配置、觸發模式等。
- 啟動數據采集:使用驅動程序或開發環境編寫代碼,啟動數據采集操作,并根據需要處理和存儲采集的數據。
參數詳情:
- 模擬輸入通道數:16通道
- 數字I/O通道數:24通道
- 模擬輸入分辨率:16位
- 最大采樣率:1.25 MS/s
- 觸發模式:支持軟件觸發、硬件觸發、數字觸發等多種觸發模式
- 定時功能:支持定時觸發和定時測量功能
- 數據傳輸接口:PCI Express或PXI總線接口
- 存儲器容量:具備適當的存儲器容量以應對大量數據采集需求
- 支持的軟件和開發環境:NI-DAQmx、LabVIEW等
英文資料:
NI PXI-6284 is a high-performance multi-channel data acquisition card and one of the products of National Instruments (NI). The following is an introduction to the product features, usage methods, and parameter details of NI PXI-6284:
Introduction to product features:
Multi channel data acquisition: NI PXI-6284 has 16 analog input channels and 24 digital I/O channels, enabling high-density data acquisition and control.
High sampling rate and accuracy: The acquisition card provides a maximum sampling rate of 1.25 MS/s (sampling times per second) and has a 16 bit analog input resolution, enabling accurate data collection.
Flexible triggering and timing functions: NI PXI-6284 supports multiple triggering modes and timing functions, and can be flexibly configured and controlled according to application requirements.
Embedded synchronization and multi card synchronization: This acquisition card supports the synchronization function of PXI bus and can synchronize with other PXI devices to achieve synchronous acquisition of multi-channel and multi card systems.
High speed data transmission and large capacity storage: NI PXI-6284 achieves fast data transmission through a high-speed data bus, while also equipped with large capacity memory, which can handle a large amount of data collection and processing needs.
usage method:
Install hardware: Insert NI PXI-6284 into the slot of the PXI bus supported host chassis and ensure that appropriate power and signal cables are connected.
Install drivers and software: Install NI provided drivers and development environments suitable for PXI-6284, such as NI-DAQmx and LabVIEW.
Configure collection parameters: Use a driver or development environment to configure, including selecting sampling rate, channel configuration, trigger mode, etc.
Start data collection: Write code using a driver or development environment, initiate data collection operations, and process and store collected data as needed.
Parameter details:
Number of analog input channels: 16 channels
Number of digital I/O channels: 24 channels
Analog input resolution: 16 bits
Maximum sampling rate: 1.25 MS/s
Trigger mode: supports multiple trigger modes such as software trigger, hardware trigger, digital trigger, etc
Timing function: supports timing triggering and timing measurement functions
Data transmission interface: PCI Express or PXI bus interface
Memory capacity: Having appropriate memory capacity to cope with large data collection needs
Supported software and development environments: NI-DAQmx, LabVIEW, etc
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn