NI PXI-6289高性能的數據采集卡
1.產 品 資 料 介 紹：
中文資料：
NI PXI-6289是一款高性能的數據采集卡，具有以下產品特點：
多通道數據采集：NI PXI-6289具有16個模擬輸入通道，可以同時采集多個信號源的數據。這使得它非常適合于需要同時監測多個信號或多通道數據采集的應用。
高速采樣率：該采集卡支持高達1.25 MS/s的采樣率，可以以高速采集數據，適用于需要高時間分辨率的應用，如快速信號捕獲和高速數據采集。
高分辨率和精度：NI PXI-6289具有16位模數轉換器（ADC），提供高精度的模擬信號采集和測量。它能夠提供準確的測量結果，適用于需要高分辨率的應用。
多種測量功能：該采集卡支持多種測量功能，包括電壓測量、電流測量、頻率測量、電阻測量等。這使得它適用于各種數據采集和測量應用。
靈活的連接接口：NI PXI-6289通過接口板與主機計算機連接，采用PXI總線標準，確保高速數據傳輸和穩定性。它還提供了各種連接接口，如BNC接口和插頭接口，便于連接各種外部信號源。
使用方法：
- 確保將NI PXI-6289插入PXI機箱中，并將機箱與主機計算機連接。
- 在計算機上安裝NI-DAQmx驅動軟件，并根據需要進行配置和設置。
- 使用NI-DAQmx編程庫或NI Measurement & Automation Explorer（NI MAX）軟件，編寫程序或配置采集參數。
- 運行程序或配置文件，開始進行數據采集。
參數詳情：
- 模擬輸入通道數：16
- 模數轉換器（ADC）位數：16位
- 最大采樣率：1.25 MS/s
- 輸入電壓范圍：±10 V
- 輸入阻抗：1 MΩ || 20 pF
- 數字輸入/輸出通道數：8
- 數字輸入/輸出電平：TTL/CMOS
- 外部觸發輸入通道數：2
- 接口：PXI總線
- 連接接口：BNC接口、插頭接口等
英文資料：
NI PXI-6289 is a high-performance data acquisition card with the following product features:
Multi channel data acquisition: NI PXI-6289 has 16 analog input channels, which can simultaneously collect data from multiple signal sources. This makes it very suitable for applications that require simultaneous monitoring of multiple signals or multi-channel data acquisition.
High speed sampling rate: This acquisition card supports a sampling rate of up to 1.25 MS/s and can collect data at high speed, suitable for applications that require high time resolution, such as fast signal acquisition and high-speed data acquisition.
High resolution and accuracy: NI PXI-6289 features a 16 bit analog-to-digital converter (ADC), providing high-precision analog signal acquisition and measurement. It can provide accurate measurement results and is suitable for applications that require high resolution.
Multiple measurement functions: This acquisition card supports multiple measurement functions, including voltage measurement, current measurement, frequency measurement, resistance measurement, etc. This makes it suitable for various data collection and measurement applications.
Flexible connection interface: NI PXI-6289 is connected to the host computer through an interface board, using PXI bus standards to ensure high-speed data transmission and stability. It also provides various connection interfaces, such as BNC interface and plug interface, to facilitate the connection of various external signal sources.
usage method:
Ensure that the NI PXI-6289 is inserted into the PXI chassis and connected to the host computer.
Install the NI-DAQmx driver software on the computer and configure and set it as needed.
Use the NI-DAQmx programming library or NI Measurement&Automation Explorer (NI MAX) software to write programs or configure collection parameters.
Run the program or configuration file to start data collection.
Parameter details:
Number of analog input channels: 16
Analog to Digital Converter (ADC) bits: 16
Maximum sampling rate: 1.25 MS/s
Input voltage range: ± 10 V
Input impedance: 1 M Ω | | 20 pF
Number of digital input/output channels: 8
Digital input/output level: TTL/CMOS
Number of external trigger input channels: 2
Interface: PXI bus
Connection interface: BNC interface, plug interface, etc
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
