NI PXI-6280高性能數據采集卡
1.產 品 資 料 介 紹：
中文資料：
NI PXI-6280是一款高性能數據采集卡，屬于NI公司的PXI系列產品。下面是對其產品特點、使用方法和參數詳情的介紹：
NI PXI-6280產品特點：
- 高性能數據采集：NI PXI-6280具備高速、高精度的數據采集能力，適用于各種測量和控制應用。
- 多通道輸入輸出：該采集卡支持多通道模擬輸入和輸出，可同時處理多個信號源。
- 低噪聲：NI PXI-6280采用了優化設計，以提供低噪聲水平，確保數據采集的準確性。
- 靈活性：該采集卡支持多種輸入和輸出連接方式，包括差分輸入、單端輸入和差分/單端混合輸入。
- 高速采集率：它具備高速采集率，可以實時采集和處理高頻率的信號。
NI PXI-6280使用方法：
- 硬件安裝：將NI PXI-6280插入PXI機箱的插槽中，并連接相應的信號源和傳感器。
- 驅動程序安裝：安裝NI-DAQmx驅動程序，該驅動程序為NI采集卡提供支持。
- 編程接口選擇：根據您的編程需求，選擇適當的編程接口，例如LabVIEW、C/C++、Python等。
- 配置采集參數：使用相應的編程語言和函數，配置采集卡的參數，如采樣率、輸入通道數等。
- 數據采集與分析：編寫代碼開始數據采集，并根據需求進行數據分析、處理和存儲。
NI PXI-6280參數詳情：
- 采樣率：最高可達1.25 MS/s（每秒采樣次數）
- 分辨率：16位
- 通道數：最多16個模擬輸入通道，8個模擬輸出通道
- 輸入范圍：可配置為±10 V、±1 V、±100 mV等
- 輸出范圍：可配置為±10 V、±1 V、±100 mV等
- 連接方式：差分輸入、單端輸入、差分/單端混合輸入
- 數據緩沖：512 MB
英文資料：
NI PXI-6280 is a high-performance data acquisition card that belongs to the PXI series products of NI Company. The following is an introduction to its product features, usage methods, and parameter details:
NI PXI-6280 Product Features:
High performance data collection: The NI PXI-6280 has high-speed and high-precision data collection capabilities, suitable for various measurement and control applications.
Multi channel input and output: This acquisition card supports multi-channel analog input and output, and can process multiple signal sources simultaneously.
Low noise: The NI PXI-6280 adopts optimized design to provide low noise levels and ensure the accuracy of data collection.
Flexibility: This acquisition card supports multiple input and output connection methods, including differential input, single ended input, and differential/single ended mixed input.
High speed acquisition rate: It has a high speed acquisition rate and can collect and process high-frequency signals in real-time.
NI PXI-6280 Usage:
Hardware installation: Insert the NI PXI-6280 into the slot of the PXI chassis and connect the corresponding signal source and sensor.
Driver installation: Install the NI-DAQmx driver, which provides support for NI acquisition cards.
Programming interface selection: Based on your programming needs, choose the appropriate programming interface, such as LabVIEW, C/C++, Python, etc.
Configure collection parameters: Use the corresponding programming language and functions to configure the parameters of the collection card, such as sampling rate, number of input channels, etc.
Data collection and analysis: Write code to start data collection, and analyze, process, and store data according to requirements.
NI PXI-6280 parameter details:
Sampling rate: up to 1.25 MS/s (sampling times per second)
Resolution: 16 bits
Number of channels: Up to 16 analog input channels and 8 analog output channels
Input range: configurable to ± 10 V, ± 1 V, ± 100 mV, etc
Output range: configurable to ± 10 V, ± 1 V, ± 100 mV, etc
Connection method: differential input, single ended input, differential/single ended mixed input
Data buffer: 512 MB
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
