ALSTOM NRD108034 8RDB44674G01 SA44674.C工控DCS系統
1.產 品 資 料 介 紹:
中文資料:
鋰電池含有易燃材料,如鋰和有機溶劑。ALSTOM NRD108034 8RDB44674G01 SA44674.C如果鋰電池被不當使用或處理不當,它們可能會爆裂并點燃,可能導致人員受傷和/或火災。
在處理鋰電池時,請仔細遵循下面列出的注意事項,以防止發生事故。? 不要短路。? 不要拆卸、變形或施加過大的壓力。? 不要加熱或焚燒。? 不要直接使用焊料。? 不要使用不同的型號。? 請勿充電。? 務必檢查極性是否正確。
要從模塊中取出電池,ALSTOM NRD108034 8RDB44674G01 SA44674.C請小心地將電池從插座中拔出。(如果在30秒內未安裝新電池,數據將丟失。)
在安裝新電池之前,請確保電池引腳清潔。記下電池極性,然后將電池壓入插座。
機載DRAM ALSTOM NRD108034 8RDB44674G01 SA44674.C機載DRAM位于夾層板上。夾層板有不同尺寸,并具有奇偶校驗保護或ECC保護。
英文資料:
Lithium batteries incorporate inflammable materials such as lithium and organic solvents. If lithium batteries are mistreated or handled incorrectly, they may burst open and ignite, possibly resulting in injury and/or fire.ALSTOM NRD108034 8RDB44674G01 SA44674.C
When dealing with lithium batteries, carefully follow the precautions listed below in order to prevent accidents. ? Do not short circuit. ? Do not disassemble, deform, or apply excessive pressure. ? Do not heat or incinerate. ? Do not apply solder directly. ? Do not use different models. ? Do not charge. ? Always check proper polarity.ALSTOM NRD108034 8RDB44674G01 SA44674.C
To remove the battery from the module, carefully pull the battery from the socket. (Data will be lost if a new battery is not installed within 30 seconds.)
Before installing a new battery, ensure that the battery pins are clean. Note the battery polarity and press the battery into the socket.ALSTOM NRD108034 8RDB44674G01 SA44674.C
Onboard DRAM The ALSTOM NRD108034 8RDB44674G01 SA44674.C onboard DRAM is located on a mezzanine board. The mezzanine boards are available in different sizes and with parity protection or ECC protection.
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn