ALSTOM N897164610L輸入輸出模塊
1.產 品 資 料 介 紹：
中文資料：
ALSTOM N897164610L重新啟動至固件更新操作當按下以太網重新啟動按鈕并保持10秒以上時，以太網接口將重新啟動至硬件更新操作。這通常在故障排除期間進行，以繞過可能無效的固件，ALSTOM N897164610L并允許使用WinLoader加載有效的固件。在固件更新真正開始之前，您可以手動退出固件更新，ALSTOM N897164610L并通過再次按下以太網重新啟動按鈕重新啟動現有固件。電池支持RAM。54注意：每當任何參考存儲器的大小發生變化時，相應參考存儲器的內容都會自動清除。55有關內存類型及其管理方式的討論，請參閱ALSTOM N897164610L編程器參考手冊，GFK-2950第3章。56本出版物發布時不支持。高級用戶參數（AUP）功能已納入PME硬件配置（HWC）中，自PME 8.60 SIM5版本起生效。58 RSTi EP CPE100在發布時不支持SNTP。ALSTOM N897164610L
英文資料：
ALSTOM N897164610LRestart into Firmware Update Operation When the Ethernet Restart pushbutton is pressed and held for more than 10 seconds, the Ethernet interface will restart into firmware update operation.ALSTOM N897164610L This is typically done during troubleshooting to bypass possibly invalid firmware and allow valid firmware to be loaded using WinLoader. Until the firmware update actually begins, you can manually exit the firmware update and restart with the existing firmware by pressing the Ethernet Restart pushbutton again.Battery-backed RAM. 54 Note: Whenever the size of any reference memory is changed, the content of the corresponding reference memory is automatically cleared. 55 For discussion of memory types and how they are managed, refer to ALSTOM N897164610LProgrammer’s Reference Manual, GFK-2950 Chapter 3. 56 Not supported at the time of this publication.The Advanced User Parameters (AUP) feature has been incorporated into PME Hardware Configuration (HWC) effective with PME release 8.60 SIM5. 58 RSTi-EP CPE100 does not support SNTP at the time of publication.ALSTOM N897164610L
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
