RELIANCE 803.65.00驅動電路板
1.產 品 詳 情 資 料：
RELIANCE 803.65.00必須在RX3i/RSTi EP配置中啟用USB端口，才能在CPU和RDSD之間傳輸數據。兼容的CPU附帶啟用了RDSD（USB）端口。RDSD加載和存儲操作可以包括以下數據：? 一個完整的應用程序，包括邏輯和配置、參考表數據以及運動應用程序的凸輪文件。（支持DSM運動應用程序的運動文件和本地邏輯。）配置可以包括基于機架的以太網接口的以太網全局數據和高級用戶參數。（盡管RDSD上必須放置一個完整的、未修改的應用程序，但您可以使用options.txt文件將應用程序的選定組件下載到目標CPU。）? 當從CPU加載項目時，密碼和OEM密鑰（如果有）將被加密并寫入RDSD。當項目存儲到沒有密碼或OEM密鑰的CPU時，這些密碼或密鑰會復制到CPU。RELIANCE 803.65.00注意：在啟用增強安全性的情況下，如果RDSD源控制器具有4級密碼保護，并且目標控制器受密碼保護，則無論密碼是否匹配，RDSD更新都將失敗。使用Legacy安全性，當項目存儲到具有密碼和/或OEM密鑰的CPU時，密碼必須匹配，否則存儲將失敗。? 故障表在加載到RDSD或從RDSD存儲之前和之后寫入RDSD。? 如果禁用USB端口的硬件配置成功存儲到CPU，則在存儲操作完成時，故障表將不會寫入RDSD。RELIANCE 803.65.00
The USB port must be enabled in the RX3i / RSTi-EP configuration in order to transfer data between the CPU and the RDSD. The compatible CPUs are shipped with the RDSD (USB) port enabled. The RDSD load and store operations can include the following data: ? An entire application, including logic and configuration, reference table data, and cam files for Motion applications. (Motion files and local logic for DSM motion applications are supported.) Configuration can include Ethernet Global Data and Advanced User Parameters for the rackbased Ethernet interface. (Although a complete, unmodified application must be placed on the RDSD, you can use an options.txt file to download selected components of the application to the target CPU.) RELIANCE 803.65.00? Passwords and OEM key, if any, are encrypted and written to the RDSD when the project is loaded from the CPU. When the project is stored to a CPU that has no passwords or OEM key, those are copied to the CPU. Note: With Enhanced Security enabled, the RDSD update will fail if the RDSD source controller has Level 4 password protection and the destination controller is password protected, regardless of whether the passwords match. With Legacy security, when the project is stored to a CPU that has passwords and/or OEM key, the passwords must match or the store will fail. ? Fault tables are written to the RDSD before and after a load to or store from the RDSD. ? If a hardware configuration that disables the USB port is successfully stored to the CPU, the fault tables will not be written to the RDSD at completion of the store operation.RELIANCE 803.65.00
2.產 品 展 示
3. 主 營 產 品
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
