RELIANCE 57401-2驅動數字I/O模塊
1.產 品 詳 情 資 料：
RELIANCE 57401-2嵌入式PROFINET控制器以下CPU支持一項功能，該功能允許將以太網LAN配置為用作PROFINET控制器：?RX3i CPE400?RX3i CPE330（需要8.90或更高版本的固件）?RSTi EP CPE10010如果要配置嵌入式PROFINET控制器功能，則必須在LAN2上為RX3i CPU400、CPE330和RSTi EP CPU100配置該功能。對于獨立CPU的RX3i CPE400和RSTi EP CPE100，RELIANCE 57401-2這將是其唯一的PROFINET控制器。在CPE330的情況下，嵌入式PROFINET控制器可以與其CPU機架中的任何機架安裝PROFINET控制器（IC695PNC001）共存。要在Proficy Machine Edition11的項目中啟用嵌入式PROFINET控制器，請在PME Navigator（圖1）中選擇RX3i CPE400（或CPE330）或RSTi EP CPE100目標，然后打開硬件配置。在“設置”選項卡上，將所選端口的指定LAN模式更改為PROFINET。PROFINET控制器節點描述隨后顯示所選LAN上存在PROFINET節點。有關更多詳細信息，請參閱PACSystems RX3i&RSTi EP PROFINET IO控制器用戶手冊，GFK-2571G或更高版本。RELIANCE 57401-2
RELIANCE 57401-2 Embedded PROFINET Controller The following CPUs support a feature that permits an Ethernet LAN to be configured for use as a PROFINET Controller: ? RX3i CPE400 ? Rx3i CPE330 (firmware version 8.90 or later required) RELIANCE 57401-2? RSTi-EP CPE10010 If the Embedded PROFINET Controller feature is to be configured, it must be configured on LAN2 for RX3i CPE400, CPE330 and RSTi-EP CPE100. In the case of RX3i CPE400 and RSTi-EP CPE100, which are Standalone CPU’s, this will be its only PROFINET Controller. In the case of CPE330, the Embedded PROFINET Controller can co-exist with any rack-mounted PROFINET Controllers (IC695PNC001) present in its CPU rack. To enable the Embedded PROFINET Controller in a project in Proficy Machine Edition11, select the RX3i CPE400 (or CPE330) or RSTi-EP CPE100 target in the PME Navigator (Figure 1) and open the Hardware Configuration. On the Settings tab, change the designated LAN Mode of the selected port to PROFINET. The PROFINET Controller node description then displays that a PROFINET node exists on the selected LAN. For further details, refer to the PACSystems RX3i & RSTi-EP PROFINET IO-Controller User Manual, GFK-2571G or later.RELIANCE 57401-2
2.產 品 展 示
3. 主 營 產 品
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
