HIMA F7131電源模塊
1.產 品 詳 情 資 料：
檢測到F（故障）/紅色單元錯誤。R（un）/綠色運行。數據庫總線；Rx/黃色RECEVE LED指示在DriveBus上接收數據幀。數據庫總線；Tx/黃色發送LED指示在傳動總線上傳輸數據幀。輸入/輸出；Rx/黃色RECEVE LED指示在I/O總線上接收數據幀。輸入/輸出；Tx/黃色發送LED指示在I/O總線上傳輸數據幀。工具/黃色RECIEVE LED指示接收PC工具總線上的數據幀（1）。（1） 該指示燈在設備前部不可見。通過塑料外殼上的通風孔可以看到。工具/黃色傳輸LED指示PC工具總線上數據幀的傳輸（1）。電流消耗（來自CEX總線24 V DC）200 mA最大外部電源電壓17 V最小25 V典型30 V最大保護等級IP20，符合EN60529和IEC 529。認證CE標記并符合EMC指令EMCD 2004/108/EC中規定的要求，符合標準EN 50081-2和EN 61000-6-2。
F(ault) /Red Unit error detected. R(un) /Green Operating. Dbus; Rx /Yellow RECIEVE LED indicating reception of data frames on the DriveBus. Dbus; Tx /Yellow TRANSMIT LED indicating transmission of data frames on the DriveBus. I/O; Rx /Yellow RECIEVE LED indicating reception of data frames on the I/O bus. I/O; Tx /Yellow TRANSMIT LED indicating transmission of data frames on the I/O Bus. Tools /Yellow RECIEVE LED indicating reception of data frames on the PC Tool bus(1). (1) This LED is not visible in the front of the unit. It can be seen through the ventilation holes in the plastic housing. Tools /Yellow TRANSMIT LED indicating transmission of data frames on the PC Tool Bus(1).Current consumption (from CEX-Bus 24 V DC) 200 mA max. External supply voltage 17 V minimum 25 V typical 30 V max Protection Rating IP20 according to EN60529, IEC 529. Approval CE-marked and meets the requirements specified in EMC Directive EMCD 2004/108/EC according to the standards EN 50081-2 and EN 61000-6-2.
2.產 品 展 示
3.公 司 優 勢 主 營 產 品
4.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
