TRICONEX 9563-910數字輸入/輸出模塊
1.產 品 介 紹
品牌:TRICONEX
型號說明:TRICONEX 9563-910數字輸入/輸出模塊
優勢:供應進口原裝正品,專業停產配件。
公司主營特點:主營產品各種模塊/卡件,控制器,觸摸屏,伺服驅動器。
2.產 品 詳 情 資 料:
TRICONEX 9563-910是一種數字輸入/輸出模塊,用于實現對工業過程的實時監控和控制。以下是一些特點、使用方法和參數規格的介紹:
特點:
- 可以同時處理8個數字輸入信號和8個數字輸出信號。
- 高速采樣率和響應時間,可實現快速實時控制。
- 內置電壓監測電路,可自動檢測電源電壓并實現保護。
- 支持熱插拔功能,可以在運行過程中安全更換模塊。
- 可以通過TRICON工作站進行在線配置和診斷,方便實時監控和故障排除。
使用方法:
- 首先,將模塊插入到TRICONEX控制器的插槽中,并確認模塊已正確安裝。
- 在TRICON工作站中對模塊進行配置和初始化,包括輸入/輸出點的分配、采樣率和報警設置等。
- 連接數字輸入和輸出信號,使用端子板連接電纜連接到模塊的接口上。
- 在TRICONEX控制器中設置相關的控制程序,并通過數字輸入信號觸發相關的操作。
- 監控和調試控制過程,使用TRICON工作站中的診斷工具進行故障排除。
參數規格:
- 輸入電壓范圍:-30V到30V
- 輸出電壓范圍:-30V到30V
- 最大采樣率:10 kHz
- 數字輸入點數:8
- 數字輸出點數:8
- 工作溫度范圍:-40℃到70℃
- 尺寸:4.40 cm x 13.60 cm x 10.00 cm
- 重量:0.2 kg
TRICONEX 9563-910 is a digital input/output module used for real-time monitoring and control of industrial processes. Here are some features, usage methods and parameter specifications:
characteristic:
It can process 8 digital input signals and 8 digital output signals at the same time.
High-speed sampling rate and response time can realize fast real-time control.
Built-in voltage monitoring circuit can automatically detect power supply voltage and realize protection.
It supports the hot-swap function and can safely replace the module during operation.
Online configuration and diagnosis can be carried out through TRICON workstation to facilitate real-time monitoring and troubleshooting.
usage method:
First, insert the module into the slot of the TRICONEX controller and confirm that the module is installed correctly.
Configure and initialize the module in the TRICON workstation, including the allocation of input/output points, sampling rate and alarm settings.
Connect the digital input and output signals, and connect them to the interface of the module with the terminal board connecting cable.
Set the relevant control program in the TRICONEX controller and trigger the relevant operation through the digital input signal.
Monitor and debug the control process, and use the diagnostic tools in the TRICON workstation for troubleshooting.
Parameter specification:
Input voltage range: - 30V to 30V
Output voltage range: - 30V to 30V
Maximum sampling rate: 10 kHz
Number of digital input points: 8
Number of digital output points: 8
Operating temperature range: - 40 ℃ to 70 ℃
Size: 4.40 cm x 13.60 cm x 10.00 cm
Weight: 0.2 kg
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn