BENTLY 3500/96顯示裝置
1.產 品 介 紹
品牌：BENTLY
型號說明：BENTLY 3500/96顯示裝置
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
BENTLY 3500/96是一種機器監測系統，可用于監測旋轉機械設備的狀態和性能。以下是一些BENTLY 3500/96的特點介紹、使用方法和參數規格：
特點介紹：
可靠性：BENTLY 3500/96具有高度可靠性，可實時監測旋轉機械設備的狀態和性能，以提高機器的可靠性和可用性。
靈敏度：該系統能夠檢測微小的振動和震動，以及其他機械異常。
多功能性：BENTLY 3500/96可用于監測多種類型的機器，包括發電機、渦輪機、壓縮機、泵和風扇等。
實時監測：該系統可實時監測機器的狀態，并在發生異常時發出警報。
數據記錄：BENTLY 3500/96可記錄機器的性能數據，以進行后續分析和故障排除。
使用方法：
連接傳感器：將振動傳感器連接到機器上，以監測振動和震動。
安裝系統：將BENTLY 3500/96安裝在控制室中，以實時監測機器的狀態。
配置系統：使用軟件配置BENTLY 3500/96系統，以根據不同機器類型和應用程序進行自定義設置。
監測狀態：啟動系統并開始監測機器的狀態。如果發現任何異常，系統將自動發出警報。
參數規格：
測量類型：振動和位移。
測量范圍：振動范圍為0-50 mm/s，位移范圍為0-5 mm。
測量頻率范圍：0.1 Hz至10 kHz。
采樣率：最高每通道12500 S/s。
數據記錄容量：可記錄超過5000小時的數據。
通信接口：支持Ethernet、Modbus、RS232和RS485等多種接口。
總之，BENTLY 3500/96是一種功能強大的機器監測系統，可用于監測各種類型的旋轉機械設備，提高機器的可靠性和可用性。
BENTLY 3500/96 is a machine monitoring system that can be used to monitor the status and performance of rotating machinery. Here are some features, usage methods and parameter specifications of BENTLY 3500/96:
Features:
Reliability: BENTLY 3500/96 is highly reliable and can monitor the status and performance of rotating machinery in real time to improve the reliability and availability of the machine.
Sensitivity: The system can detect small vibration and vibration, as well as other mechanical abnormalities.
Multi-functionality: BENTLY 3500/96 can be used to monitor various types of machines, including generators, turbines, compressors, pumps and fans.
Real-time monitoring: the system can monitor the status of the machine in real time and send an alarm in case of abnormality.
Data recording: BENTLY 3500/96 can record the performance data of the machine for subsequent analysis and troubleshooting.
usage method:
Connect the sensor: connect the vibration sensor to the machine to monitor vibration and vibration.
Installation system: install BENTLY 3500/96 in the control room to monitor the status of the machine in real time.
Configure the system: use software to configure the BENTLY 3500/96 system to customize settings according to different machine types and applications.
Monitoring status: Start the system and start monitoring the status of the machine. If any abnormality is found, the system will automatically send an alarm.
Parameter specification:
Measurement type: vibration and displacement.
Measurement range: vibration range is 0-50 mm/s, displacement range is 0-5 mm.
Measurement frequency range: 0.1 Hz to 10 kHz.
Sampling rate: up to 12500 S/s per channel.
Data recording capacity: more than 5000 hours of data can be recorded.
Communication interface: supports Ethernet, Modbus, RS232, RS485 and other interfaces.
In short, BENTLY 3500/96 is a powerful machine monitoring system, which can be used to monitor various types of rotating machinery and improve the reliability and availability of the machine.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
