BENTLY 3500/95系統集成顯示器
1.產 品 介 紹
品牌：BENTLY
型號說明：BENTLY 3500/95系統集成顯示器
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
BENTLY 3500/95是一種機械振動監測和保護系統，主要用于監測旋轉機械設備（如軸承、齒輪箱、發動機、泵等）的振動和狀態，以及提供相應的報警和保護功能。下面是該產品的特點介紹、使用方法和參數規格：
特點介紹：
- 高可靠性：采用可編程的邏輯控制器，能夠自動診斷系統狀態，確保高可靠性。
- 多種測量方式：支持速度、加速度、位移等多種振動測量方式，可適用于不同類型的機械設備。
- 靈活配置：可靈活配置多種傳感器、探頭和信號放大器，以適應不同的監測要求。
- 大容量存儲：內置存儲器可存儲多種狀態數據和事件記錄，有助于診斷和排除故障。
- 實時監測：可實時監測機械設備的振動狀態，并在異常情況下發出報警和保護信號。
使用方法：
- 安裝傳感器和探頭：將傳感器和探頭安裝在機械設備上，并連接到BENTLY 3500/95系統。
- 配置系統參數：使用BENTLY 3500/95的軟件界面，配置系統參數，如測量方式、傳感器類型、警戒值等。
- 監測和分析數據：BENTLY 3500/95系統會實時監測機械設備的振動狀態，并將數據記錄下來。用戶可以使用軟件界面進行數據分析和故障診斷。
- 發出報警和保護信號：當機械設備的振動狀態異常時，BENTLY 3500/95系統會發出報警和保護信號，以保護機械設備。
參數規格：
- 測量范圍：速度（0-300 mm/s）、加速度（0-25 g）和位移（0-5 mm）。
- 分辨率：速度（0.01 mm/s）、加速度（0.001 g）和位移（0.001 mm）。
- 采樣率：可達到102.4 kHz。
- 存儲容量：可存儲100,000個樣本。
- 通訊接口：支持以太網、RS-232和RS-485接口。
BENTLY 3500/95 is a mechanical vibration monitoring and protection system, which is mainly used to monitor the vibration and status of rotating mechanical equipment (such as bearings, gear boxes, engines, pumps, etc.) and provide corresponding alarm and protection functions. The following are the features, use methods and parameter specifications of the product:
Features:
High reliability: the programmable logic controller can automatically diagnose the system status to ensure high reliability.
Multiple measurement methods: support multiple vibration measurement methods such as speed, acceleration and displacement, which can be applied to different types of mechanical equipment.
Flexible configuration: multiple sensors, probes and signal amplifiers can be flexibly configured to meet different monitoring requirements.
Mass storage: The built-in memory can store a variety of status data and event records, which is helpful for diagnosis and troubleshooting.
Real-time monitoring: It can monitor the vibration status of mechanical equipment in real time, and send out alarm and protection signals under abnormal conditions.
usage method:
Install the sensor and probe: install the sensor and probe on the mechanical equipment and connect to the BENTLY 3500/95 system.
Configure system parameters: use the software interface of BENTLY 3500/95 to configure system parameters, such as measurement method, sensor type, warning value, etc.
Monitoring and analysis of data: The BENTLY 3500/95 system will monitor the vibration status of mechanical equipment in real time and record the data. The user can use the software interface for data analysis and fault diagnosis.
Send alarm and protection signals: When the vibration state of mechanical equipment is abnormal, BENTLY 3500/95 system will send alarm and protection signals to protect mechanical equipment.
Parameter specification:
Measurement range: speed (0-300 mm/s), acceleration (0-25 g) and displacement (0-5 mm).
Resolution: velocity (0.01 mm/s), acceleration (0.001 g) and displacement (0.001 mm).
Sampling rate: 102.4 kHz.
Storage capacity: 100000 samples can be stored.
Communication interface: support Ethernet, RS-232 and RS-485 interfaces.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
