BENTLY 3500/45-01位移傳感器
1.產 品 介 紹
品牌：BENTLY
型號說明：BENTLY 3500/45-01位移傳感器
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
BENTLY 3500/45-01是一款振動監測系統，可以用于監測機械設備的振動水平，以檢測設備的運行狀況并識別可能的故障。以下是該產品的特點、使用方法和參數規格：
特點：
- 采用多通道、多參數監測，可以同時監測多個設備。
- 采用數字信號處理技術，提高了數據的準確性和穩定性。
- 支持多種振動監測模式，包括位移、速度、加速度等模式。
- 內置報警功能，當設備振動超過設定值時會自動發出警報。
- 可以通過網絡或本地連接方式進行數據傳輸和分析。
使用方法：
- 安裝設備：將設備安裝在需要監測的機械設備上，連接傳感器和信號線。
- 連接設備：通過網絡或本地連接方式連接設備，連接電源。
- 配置設備：使用相關軟件進行設備配置，包括振動模式、報警設置等。
- 開始監測：啟動設備，開始對機械設備的振動進行監測和數據采集。
參數規格：
- 通道數：最多可擴展至32個通道。
- 監測范圍：可根據不同的傳感器進行設置，一般為0-1000mm/s（速度）、0-50g（加速度）、0-1000μm（位移）。
- 數據采集頻率：最高可達204.8kHz。
- 數據傳輸方式：支持以太網、RS-485、Modbus等多種數據傳輸方式。
- 工作溫度：-20℃至+70℃。
- 電源：24VDC。
BENTLY 3500/45-01 is a vibration monitoring system, which can be used to monitor the vibration level of mechanical equipment to detect the operation status of equipment and identify possible faults. The following are the features, use methods and parameter specifications of the product:
characteristic:
With multi-channel and multi-parameter monitoring, multiple devices can be monitored at the same time.
Digital signal processing technology is adopted to improve the accuracy and stability of data.
Support a variety of vibration monitoring modes, including displacement, velocity, acceleration and other modes.
Built-in alarm function will automatically send an alarm when the equipment vibration exceeds the set value.
Data transmission and analysis can be carried out through network or local connection.
usage method:
Installation of equipment: install the equipment on the mechanical equipment to be monitored, and connect the sensor and signal line.
Connect equipment: connect equipment and power supply through network or local connection.
Configure equipment: use relevant software to configure equipment, including vibration mode, alarm setting, etc.
Start monitoring: start the equipment, and start monitoring and data collection for the vibration of mechanical equipment.
Parameter specification:
Number of channels: can be expanded to 32 channels at most.
Monitoring range: can be set according to different sensors, generally 0-1000mm/s (speed), 0-50g (acceleration), 0-1000 μ M (displacement).
Data acquisition frequency: up to 204.8kHz.
Data transmission mode: Ethernet, RS-485, Modbus and other data transmission modes are supported.
Working temperature: - 20 ℃ to+70 ℃.
Power supply: 24VDC.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
