BENTLY 3500/42M-01-00振動監測模塊
1.產 品 介 紹
品牌：BENTLY
型號說明：BENTLY 3500/42M-01-00振動監測模塊
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
BENTLY 3500/42M-01-00是一款機械震動測量模塊，可以用于監測旋轉機械設備（如發電機、壓縮機、泵等）的機械振動和震動信號。以下是該產品的特點、使用方法和參數規格的簡要介紹：
特點：
- 可以測量機械振動速度、加速度、位移和峰峰值等參數
- 具有高速數據采集和處理能力，能夠?qū)崟r(shí)監測設備的機械狀態
- 支持多通道數據采集和傳輸
- 可以與BENTLY的其他監測設備（如3500/40M、3500/45等）組合使用，形成完整的機械監測系統
使用方法：
- 安裝模塊：將3500/42M-01-00模塊插入到BENTLY 3500監測系統的插槽中，并連接到要監測的設備上。
- 配置參數：使用3500監測系統的配置軟件，設置模塊的采樣率、濾波器、警報和故障閾值等參數。
- 監測設備狀態：啟動監測系統并開始采集數據，可以通過監測系統的顯示屏或軟件界面來查看設備的振動狀態和警報信息。
參數規格：
- 通道數量：4個
- 采樣率：1024 Hz
- 量程范圍：振動速度（0-25mm/s）、振動加速度（0-30g）、振動位移（0-250μm）
- 濾波器類型：低通、高通、帶通、帶阻
- 閾值設置范圍：警報閾值（0-20mm/s）、危險閾值（0-50mm/s）
- 輸入阻抗：100MΩ
- 輸出阻抗：100Ω
- 工作溫度范圍：-40°C到+70°C
需要注意的是，BENTLY 3500/42M-01-00模塊是作為BENTLY 3500監測系統的一部分來使用的，所以在使用之前需要確保已經正確安裝了整個監測系統并進行了相應的配置。
BENTLY 3500/42M-01-00 is a mechanical vibration measurement module that can be used to monitor the mechanical vibration and vibration signals of rotating mechanical equipment (such as generators, compressors, pumps, etc.). The following is a brief introduction of the product's features, use methods and parameter specifications:
characteristic:
It can measure mechanical vibration speed, acceleration, displacement, peak value and other parameters
With high-speed data acquisition and processing capability, it can monitor the mechanical status of equipment in real time
Support multi-channel data acquisition and transmission
It can be combined with other BENTLY monitoring equipment (such as 3500/40M, 3500/45, etc.) to form a complete mechanical monitoring system
usage method:
Install the module: Insert the 3500/42M-01-00 module into the slot of the BENTLY 3500 Monitoring System and connect it to the equipment to be monitored.
Configuration parameters: use the configuration software of the 3500 monitoring system to set the sampling rate, filter, alarm, fault threshold and other parameters of the module.
Monitoring equipment status: start the monitoring system and start collecting data. You can view the vibration status and alarm information of the equipment through the display screen or software interface of the monitoring system.
Parameter specification:
Number of channels: 4
Sample rate: 1024 Hz
Range: vibration speed (0-25mm/s), vibration acceleration (0-30g), vibration displacement (0-250 μ m）
Filter type: low-pass, high-pass, band-pass, band-stop
Threshold setting range: alarm threshold (0-20mm/s), hazard threshold (0-50mm/s)
Input impedance: 100M Ω
Output impedance: 100 Ω
Operating temperature range: - 40 ° C to+70 ° C
It should be noted that the BENTLY 3500/42M-01-00 module is used as a part of the BENTLY 3500 monitoring system, so it is necessary to ensure that the entire monitoring system has been correctly installed and configured before use
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
