BENTLY 3500/61C振動變送器監測器
1.產 品 介 紹
品牌：BENTLY
型號說明：BENTLY 3500/61C振動變送器監測器
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
ENTLY 3500/61C是一款高級振動監測和機械保護系統，其主要特點如下：
高度可靠：BENTLY 3500/61C采用高精度振動傳感器和先進的信號處理技術，可實時監測和診斷機器的振動狀況，并提供精確的機械保護。
多功能性：BENTLY 3500/61C不僅可以監測振動，還可以監測軸承溫度、軸承金屬磨損、沖擊和速度等參數，提供完整的機器狀態信息。
網絡化：BENTLY 3500/61C可通過網絡接口實現與計算機或PLC的通信，方便數據采集和監測。
易于操作：BENTLY 3500/61C的圖形用戶界面直觀易用，支持多語言，便于操作和設置參數。
使用方法：
安裝：將振動傳感器和其他相關設備安裝到機器上，并連接到BENTLY 3500/61C的輸入端口。
配置：使用BENTLY 3500/61C的圖形用戶界面，設置振動監測參數、機器保護閾值和報警通知方式等。
監測：啟動BENTLY 3500/61C系統，開始實時監測機器狀態，同時記錄歷史數據和事件。
參數規格：
輸入通道：4個振動輸入通道、4個軸承溫度輸入通道、4個速度輸入通道。
振動監測范圍：0-10g RMS，0-20g peak。
軸承溫度監測范圍：-50℃至+150℃。
速度監測范圍：0-30 mm/s，0-150 mm/s。
數據采樣率：5120樣本/秒。
通信接口：以太網、Modbus TCP/IP、Modbus RTU、RS485等。
支持的協議：HART、Foundation Fieldbus等。
電源需求：100-240VAC，50/60Hz。
ENTLY 3500/61C is an advanced vibration monitoring and mechanical protection system with the following main features:
Highly reliable: BENTLY 3500/61C adopts high-precision vibration sensor and advanced signal processing technology, which can monitor and diagnose the vibration condition of the machine in real time and provide accurate mechanical protection.
Multi-functionality: BENTLY 3500/61C can not only monitor vibration, but also monitor bearing temperature, bearing metal wear, impact, speed and other parameters, providing complete machine status information.
Networking: BENTLY 3500/61C can communicate with computer or PLC through network interface to facilitate data acquisition and monitoring.
Easy to operate: The graphical user interface of BENTLY 3500/61C is intuitive and easy to use, supports multiple languages, and is easy to operate and set parameters.
usage method:
Installation: Install the vibration sensor and other related equipment on the machine and connect it to the input port of BENTLY 3500/61C.
Configuration: use the graphical user interface of BENTLY 3500/61C to set vibration monitoring parameters, machine protection threshold and alarm notification mode.
Monitoring: Start the BENTLY 3500/61C system, start real-time monitoring of machine status, and record historical data and events.
Parameter specification:
Input channels: 4 vibration input channels, 4 bearing temperature input channels and 4 speed input channels.
Vibration monitoring range: 0-10g RMS, 0-20g peak.
Bearing temperature monitoring range: - 50 ℃ to+150 ℃.
Speed monitoring range: 0-30 mm/s, 0-150 mm/s.
Data sampling rate: 5120 samples/second.
Communication interface: Ethernet, Modbus TCP/IP, Modbus RTU, RS485, etc.
Supported protocols: HART, Foundation Fieldbus, etc.
Power demand: 100-240VAC, 50/60Hz.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
