BENTLY 3500/50M轉速表模塊
1.產 品 介 紹
品牌：BENTLY
型號說明：BENTLY 3500/50M轉速表模塊
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
BENTLY 3500/50M是一種機械振動監測和分析儀器，可用于監測旋轉機械的運行狀況。下面是一些關于該產品的特殊點介紹和映射：使用
特點介紹：
- BENTLY 3500/50M可以通過檢測儀器的振動、溫度和速度等參數，來實時監測儀器設備的運行狀況。
- 它可以監測不同類型的機械振動，包括軸向、橫向和橫向振動。
- 它支持多種監測傳感器類型，包括速度計、速度計和位移傳感器。
- 它具有高度靈魂活性和可擴展性，可以與其他BENTLY產品配套使用，以擴展其功能。
使用方法：
- 首先，將BENTLY 3500/50M安裝在要監控的機器設備上，并連接傳感器到儀器上。
- 然后，使用儀器的軟件界面設置監視參數，例如振動警報值和警報警報值等。
- 最后，通過觀察儀器上的數據來監控儀器設備的運行狀況，并及時處理任何異常情況。
參考數據：
- 測量范圍：從0到2000Hz的機械振動信號。
- 采集率：最高達12.8kHz的采集率。
- 傳感器類：支持多種速度計、速度計和位置傳感器。
- 數據存儲器：內部設置存儲器，可存儲高達10000個測量數據點。
- 數據通信：支持RS232、RS485、以太網等多種通信接口。
- 其他特性：支持遠程監控和控制、數據報告生成和診斷等功能。
BENTLY 3500/50M is a mechanical vibration monitoring and analysis instrument, which can be used to monitor the operation of rotating machinery. Here are some special points about the product and mapping: using
Features:
BENTLY 3500/50M can monitor the operation status of instruments and equipment in real time by detecting the vibration, temperature, speed and other parameters of the instrument.
It can monitor different types of mechanical vibration, including axial, transverse and transverse vibration.
It supports a variety of monitoring sensor types, including speedometer, speedometer and displacement sensor.
It has high soul activity and scalability, and can be used with other BENTLY products to expand its functions.
usage method:
First, install the BENTLY 3500/50M on the machine equipment to be monitored and connect the sensor to the instrument.
Then, use the software interface of the instrument to set monitoring parameters, such as vibration alarm value and alarm alarm value.
Finally, monitor the operation of the instrument and equipment by observing the data on the instrument, and deal with any abnormal situation in time.
Reference data:
Measuring range: mechanical vibration signal from 0 to 2000Hz.
Acquisition rate: up to 12.8 kHz.
Sensor class: support a variety of speedometers, speedometers and position sensors.
Data memory: internal setting memory can store up to 10000 measurement data points.
Data communication: support RS232, RS485, Ethernet and other communication interfaces.
Other features: support remote monitoring and control, data report generation and diagnosis and other functions.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
