BENTLY 3500/22-01-01監測卡件模塊
1.產 品 介 紹
品牌：BENTLY
型號說明：BENTLY 3500/22-01-01監測卡件模塊
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
產品特點：
- 支持多種振動和溫度傳感器類型，包括加速度、速度、位置、溫度傳感器等。
- 可實時監控旋轉機械設備的振動、溫度等參數，支持多種信號處理方法，包括峰值、有效率、速度、加速度等。
- 支持多種通信接口，包括RS232、RS485、以太網等，方方便數據傳輸和設備管理。
- 支持多種報警和故障診斷故障能力，可根據設置的實時報警和記錄異常事件。
產品編號：
- 輸入信號：1路振動信號，1路溫度信號。
- 輸入范圍：振動信號：加速0-30g、速度0-5in/s、位移0-5mil；溫度信號：-50℃ ~ +125℃。
- 數據采集速度：可配置，最高可達10240次/秒。
- 通訊接口：RS232、RS485、以太網。
- 電源要求：+24VDC。
- 工作溫度：-40℃ ~ +85℃。
- 尺寸：標準3U高，廣度約為13.3cm。
使用方法：
安裝模塊：將3500/22-01-01模塊插入到BENTLY 3500機架上的一個空隙位置中。確保模塊已正確安裝并牢固。
連接傳感器：連接振動和溫度傳感器到模塊的輸入端口，確保連接正確無誤。
配置參數：使用BENTLY 3500系列軟件或手持終端配置模塊的參數，包括采集率、信息處理方法、報警郭值等。
監測：啟動彎曲3500軟件軟件終端手持終端終端手持手持監測的振動和溫度等等參數參數。如有發生異常情況發生異常異常異常
總之，BENTLY 3500/22-01-01模塊是一款高性能、可靠的振動監測模塊，適用于各種旋轉機械設備的故障診斷和預測性維護。
Product features:
Support a variety of vibration and temperature sensor types, including acceleration, speed, position, temperature sensor, etc.
It can monitor the vibration, temperature and other parameters of rotating mechanical equipment in real time, and support a variety of signal processing methods, including peak value, efficiency, speed, acceleration, etc.
Support a variety of communication interfaces, including RS232, RS485, Ethernet, etc., to facilitate data transmission and equipment management.
It supports multiple alarm and fault diagnosis capabilities, and can alarm and record abnormal events in real time according to the settings.
Product No.:
Input signal: 1 vibration signal, 1 temperature signal.
Input range: vibration signal: acceleration 0-30g, speed 0-5in/s, displacement 0-5mil; Temperature signal: - 50 ℃~+125 ℃.
Data acquisition speed: configurable, up to 10240 times/second.
Communication interface: RS232, RS485, Ethernet.
Power requirement:+24VDC.
Working temperature: - 40 ℃~+85 ℃.
Size: standard 3U high, width about 13.3cm.
usage method:
Install the module: Insert the 3500/22-01-01 module into a vacant position on the BENTLY 3500 rack. Ensure that the module is properly installed and secure.
Connect the sensor: connect the vibration and temperature sensor to the input port of the module, and ensure that the connection is correct.
Configuration parameters: use BENTLY 3500 series software or handheld terminal configuration module parameters, including acquisition rate, information processing method, alarm threshold, etc.
Monitoring: Start bending 3500 software terminal handheld terminal handheld monitoring vibration, temperature and other parameters. In case of any abnormity, abnormity
In short, BENTLY 3500/22-01-01 module is a high-performance and reliable vibration monitoring module, which is applicable to fault diagnosis and predictive maintenance of various rotating machinery equipment.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
