ICS TRIPLEX T9431控制主板卡件
1.產 品 介 紹
品牌：ICS TRIPLEX T9431
型號說明：ICS TRIPLEX T9431控制主板卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
連接到RCU控制鏈路電纜（TK856）連接器的標有“UPPER”的CPU將在控制生成器和操作員站中定義為“UPPER”。標記與CPU的物理位置無關。ICS TRIPLEX T9431任何CPU都可以成為主CPU。提供電源和網絡連接：ICS TRIPLEX T9431a.將電源線連接到兩個CPU的螺紋端子L+和L-，將SS8xx的電源監控信號連接到螺紋端子SA和SB。b.將控制網絡電纜連接到CN1（單總線連接）或CN1+CN2（冗余總線連接）。控制網絡連接到兩個CPU。c.使用主CPU的電纜TK212將控制生成器連接到COM4（如果需要更改IP地址等）。否則，將控制生成器與控制網絡連接。7.將光學模塊總線連接到處理器單元上的光學觸點（參見第32頁的圖2和第131頁的圖40）。S800 I/O文檔中提供了有關光纜選擇和光纜長度的信息。8.通過將CPU連接到外部SB822電池單元來提供電池備份。根據第144頁安裝SB822可充電外部電池單元中的說明安裝它們。兩個CPU應由同一電源供電（單電源或冗余電源）。有關冗余電源，請參見第140頁的圖46。ICS TRIPLEX T9431
The CPU connected to the RCU Control Link Cable (TK856) connector marked “UPPER” will be defined as “UPPER” in the Control Builder and Operator Station. The marking has no relevance to the physical placement of the CPUs.ICS TRIPLEX T9431Any CPU can become the Primary CPU.Provide connections for power supply and network: a. Connect the power leads to screw terminals L+ and L- of both CPUs, and the power supervision signals from SS8xx to screw terminals SA and SB. b. Connect the Control Network cables to CN1 (single bus connection) or CN1 + CN2 (redundant bus connection). The Control Network is connected to both CPUs. c. Connect the Control Builder to COM4 with cable TK212 of the Primary CPU (if required for changing an IP address etc.). Otherwise connect the Control Builder to the Control Network.ICS TRIPLEX T94317. Connect the optical ModuleBus to the optical contacts on the processor units (see Figure 2 on page 32 and Figure 40 on page 131). Information regarding optical cable selection and cable length is provided in the S800 I/O documentation. 8. Provide battery backup by connecting the CPUs to the external SB822 battery units. Install them according to the instructions in Installing the SB822 Rechargeable External Battery Unit on page 144. Both CPUs should be powered from the same supply (single or redundant). For redundant power supply, see Figure 46 on page 140.ICS TRIPLEX T9431
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
