WOODWARD 5466-063 PLC系統備件
1.產 品 介 紹
品牌：WOODWARD
型號說明：WOODWARD 5466-063 PLC系統備件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
WOODWARD 5466-063預制鋁型材有用于水平安裝的鋁型材。鋁型材為相關產品提供了良好的接地和剛性安裝。鋁型材應至少用4個自攻螺釘固定在機柜上。型材上有螺釘槽，可用于在高振動環境中固定模塊。圖16。DIN導軌支架的鋁型材WOODWARD 5466-063控制器和相關裝置安裝在DIN導軌上時必須斷電和斷開！PM8xx和CI8xx單元的安裝程序，包括基板在將任何處理器單元或通信接口安裝到DIN導軌上之前，請仔細閱讀設備附帶的安裝說明。由于電子單元和基板是作為一個單元提供的，因此在安裝過程中不需要將它們分開。將單元安裝到DIN導軌上只需要一個刀片螺絲刀，該螺絲刀牢固地安裝在基板鎖定螺釘（1 mm槽）中。有關安裝程序的詳細信息WOODWARD 5466-063
Prefabricated aluminum profile There are aluminum profiles for horizontal mounting. The aluminum profile gives an excellent grounding and rigid mounting of products concerned. The aluminum profile shall be fastened to the cabinet with at least 4 self-tapping screws.The profile has grooves for screws that can be used for fastening the modules in an environment with high vibrations. Figure 16. Al-profile for DIN-rail support The WOODWARD 5466-063 Controller and associated units must be unpowered and disconnected when being mounted onto a DIN-rail!Mounting Procedure for PM8xx and CI8xx Units, Complete with Baseplates Before mounting any processor unit or communication interface onto the DIN-rail, read carefully the installation instructions provided with the equipment. Since the electronic unit and baseplate are supplied as a single unit, there is no requirement to separate them during the mounting procedure.Mounting the units onto the DIN-rail only requires a blade screwdriver that fits securely into the baseplate locking screw (1 mm slot). For further details on mounting procedureWOODWARD 5466-063
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
