SST SST-1500-RCX-3-1-2伺服電機驅動器
1.產 品 介 紹
品牌:SST
型號說明:SST SST-1500-RCX-3-1-2伺服電機驅動器
優勢:供應進口原裝正品,專業停產配件。
公司主營特點:主營產品各種模塊/卡件,控制器,觸摸屏,伺服驅動器。
2.產 品 詳 情 資 料:
SST SST-1500-RCX-3-1-2如果備份單元出現錯誤,您也可以在系統運行時更換備份單元。備份單元中發生的錯誤不會影響主單元的操作。主單元和備用單元在邏輯上彼此分離。主處理器單元中的硬件錯誤導致系統執行正確的轉換。這些硬件錯誤是單個錯誤。應用程序編程和通信完全不受冗余的影響。PM86x/TP830冗余SST SST-1500-RCX-3-1-2有一個RCU鏈路連接器,用于連接RCU鏈路電纜(參見第32頁圖2)。在冗余系統中,兩個處理器單元通過RCU鏈路電纜(最大1米)連接在一起。兩個處理器單元也連接到相同的CEX總線,兩個處理器中的任何一個都可以控制擴展單元。底板TP830上的串行端口COM3不能用于冗余CPU配置。SST SST-1500-RCX-3-1-2
If an error arises in the backup unit, you can also replace the backup unit while the system is running. Errors which occur in the backup unit can never affect the primary unit's operation. The primary unit and the backup unit are logically separated from one another. Hardware errors in the primary processor unit cause the system to perform a correct changeover. These hardware errors are single errors. The application programming and the communication are totally unaffected by the redundancy. PM86x/TP830 Redundancy The SST SST-1500-RCX-3-1-2 has an RCU Link Connector for connecting the RCU Link Cable (see Figure 2 on page 32). In a redundant system the two processor units are linked together with the RCU Link Cable (max 1 m). Both processor units are also connected to the same CEX-Bus and either of the two can control the expansion units The serial port, COM3 on the baseplate TP830, cannot be used in redundant CPU configuration.SST SST-1500-RCX-3-1-2
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn