HONEYWELL 51401551-301控制板
1.產 品 介 紹
品牌：HONEYWELL
型號說明：HONEYWELL 51401551-301控制板
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
HONEYWELL 51401551-301接口特性在為DTE和DCE設備之間的串行二進制數據交換指定參數時，EIA-530標準假定使用平衡線路，遠程環回、本地環回和測試模式線路除外，這些線路是單端的。在以下任何一種情況下，平衡線路數據交換通常優先于非平衡線路數據互換：? 互連電纜過長，無法進行有效的不平衡操作。? 互連電纜暴露在外部噪聲源中，HONEYWELL 51401551-301可能會導致在電纜負載端的信號導體和電路接地之間差分測量的電壓超過±1V? 用電阻器代替變送器。? 有必要盡量減少對其他信號的干擾。? 可能需要反轉信號（例如，通過反轉電纜對可以實現正極性標記到負極性標記）。表A-5和A-6列出了適用于MVME162FX的EIA-530接口發射機和接收機參數。HONEYWELL 51401551-301
Interface Characteristics In specifying parameters for serial binary data interchange between DTE and DCE devices, the EIA-530 standard assumes the use of balanced lines, except for the Remote Loopback, Local Loopback, and Test Mode lines,HONEYWELL 51401551-301which are single-ended. Balanced-line data interchange is generally employed in preference to unbalanced-line data interchange where any of the following conditions prevail: ? The interconnection cable is too long for effective unbalanced operation.HONEYWELL 51401551-301? The interconnection cable is exposed to extraneous noise sources that may cause an unwanted voltage in excess of ±1V measured differentially between the signal conductor and circuit ground at the load end of the cable, with a 50? resistor substituted for the transmitter. ? It is necessary to minimize interference with other signals. ? Inversion of signals may be required (e.g., plus polarity MARK to minus polarity MARK may be achieved by inverting the cable pair). EIA-530 interface transmitter and receiver parameters applicable to the MVME162FX are listed in Tables A-5 and A-6.HONEYWELL 51401551-301
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
