HONEYWELL 900RR0-0001數字量控制板卡
1.產 品 介 紹
品牌:HONEYWELL
型號說明:HONEYWELL 900RR0-0001數字量控制板卡
優勢:供應進口原裝正品,專業停產配件。
公司主營特點:主營產品各種模塊/卡件,控制器,觸摸屏,伺服驅動器。
2.產 品 詳 情 資 料:
HONEYWELL 900RR0-0001符合EIA-232-D規范。注意,盡管EIA-232-D標準建議使用長度不超過50英尺(15m)的短互連電纜,但如果在接口點測量的總負載電容(包括信號終端)不超過2500pF,則允許使用更長的電纜。EIA-530標準定義了該接口的機械方面,HONEYWELL 900RR0-0001該接口用于同步和異步串行二進制數據的傳輸。它適用于平衡(雙端)和不平衡(單端)信令,并提供了比具有相同DB25連接器的EIA-232-D更高的數據速率的可能性。表A-4列出了當端口通過串行接口模塊配置為EIA-530 DCE或DTE端口時,串行端口B(前面板上的串行端口2)上可用的EIA-530互連。HONEYWELL 900RR0-0001
The HONEYWELL 900RR0-0001 conforms to EIA-232-D specifications. Note that although the EIA-232-D standard recommends the use of short interconnection cables not more than 50 feet (15m) in length, longer cables are permissible provided the total load capacitance measured at the interface point and including signal terminator does not exceed 2500pF.EIA-530 Connections The EIA-530 interface complements the EIA-232-D interface in function.HONEYWELL 900RR0-0001The EIA-530 standard defines the mechanical aspects of this interface, which is used for transmission of serial binary data, both synchronous and asynchronous. It is adaptable to balanced (double-ended) as well as unbalanced (single-ended) signaling and offers the possibility of higher data rates than EIA-232-D with the same DB25 connector. Table A-4 lists the EIA-530 interconnections that are available at serial port B (SERIAL PORT 2 on the front panel) when the port is configured via serial interface modules as an EIA-530 DCE or DTE port.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn