REXROTH HCS02.1E-W0028-A-03-NNNN伺服驅動器
1.產 品 介 紹
品牌：REXROTH
型號說明：REXROTH HCS02.1E-W0028-A-03-NNNN伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
REXROTH HCS02.1E-W0028-A-03-NNNNMPCR在通電時包含$00，表示初始化尚未完成。隨著初始化的進行，執行路徑進入“prompt”例程。在發送提示之前，此例程在MPCR中放置一個R，以指示初始化已完成。然后發送提示。如果沒有終端連接到該端口，MPCR仍被輪詢，以查看外部處理器是否需要將控制傳遞到雙端口RAM。如果終端確實響應，REXROTH HCS02.1E-W0028-A-03-NNNN則在輪詢串行端口以獲取用戶輸入時，MPCR也會出于相同的目的進行輪詢。遠程處理器放置在MPCR中的ASCII G表示請求Go Direct類型的傳輸。MPCR中的ASCII B表示在傳輸控制之前（與GO命令一樣）要配置斷點。在這兩個序列中，MPCR中都放置了一個E，以指示在控制傳遞給RAM之前正在執行。注意，任何遠程處理器都可以檢查MPCR內容。REXROTH HCS02.1E-W0028-A-03-NNNN
The MPCR contains $00 at power-up, indicating that initialization is not yet complete. As the initialization proceeds, the execution path comes to the "prompt" routine. Before sending the prompt, this routine places an R in the MPCR to indicate that initialization is complete. Then the prompt is sent. If no terminal is connected to the port, REXROTH HCS02.1E-W0028-A-03-NNNNthe MPCR is still polled to see whether an external processor requires control to be passed to the dual-port RAM. If a terminal does respond, the MPCR is polled for the same purpose while the serial port is being polled for user input. An ASCII G placed in the MPCR by a remote processor indicates that the Go Direct type of transfer is requested. An ASCII B in the MPCR indicates that breakpoints are to be armed before control is transferred (as with the GO command). In either sequence, an E is placed in the MPCR to indicate that execution is underway just before control is passed to RAM. Note that any remote processor could examine the MPCR contents.REXROTH HCS02.1E-W0028-A-03-NNNN
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
