REXROTH MSK050C-0600-NN-M1-UP1-NNNN伺服電機
1.產 品 介 紹
品牌：REXROTH
型號說明：REXROTH MSK050C-0600-NN-M1-UP1-NNNN伺服電機
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
REXROTH MSK050C-0600-NN-M1-UP1-NNNN當觀察任何162Bug命令的輸出時，如果啟用了XON/XOFF協議（默認），則可以輸入對終端端口有效的XON和XOFF字符來控制輸出。162Bug將這些字符分別初始化為^S和^Q，但您可以使用PF命令更改它們。在初始化（默認）模式下，操作如下：磁盤I/O支持162Bug可以通過VMEbus與智能磁盤控制器模塊通信來啟動磁盤輸入/輸出。REXROTH MSK050C-0600-NN-M1-UP1-NNNN162Bug中內置的磁盤支持設施包括命令級磁盤操作、供用戶程序使用的磁盤I/O系統調用（僅通過TRAP#15指令之一）以及為磁盤參數定義的數據結構。162Bug將模塊映射的地址、連接到控制器模塊的設備類型和數量等參數保存在表中。這些參數的默認值在通電和冷啟動重置時分配，但可以按照本章稍后關于默認參數的章節所述進行更改。REXROTH MSK050C-0600-NN-M1-UP1-NNNN
When observing output from any 162Bug command, the XON and XOFF characters which are in effect for the terminal port may be entered to control the output, if the XON/XOFF protocol is enabled (default). These characters are initialized to ^S and ^Q respectively by 162Bug, but you may change them with the PF command. In the initialized (default) mode,REXROTH MSK050C-0600-NN-M1-UP1-NNNNoperation is as follows:Disk I/O Support 162Bug can initiate disk input/output by communicating with intelligent disk controller modules over the VMEbus. Disk support facilities built into 162Bug consist of command-level disk operations, disk I/O system calls (only via one of the TRAP #15 instructions) for use by user programs, and defined data structures for disk parameters. Parameters such as the address where the module is mapped and the type and number of devices attached to the controller module are kept in tables by 162Bug. Default values for these parameters are assigned at power-up and cold-start reset, but may be altered as described in the section on default parameters, later in this chapter.REXROTH MSK050C-0600-NN-M1-UP1-NNNN
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
