REXROTH HDS04.2-W200N-HA36-01-FW電機驅動器
1.產 品 介 紹
品牌：REXROTH
型號說明：REXROTH HDS04.2-W200N-HA36-01-FW電機驅動器
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
REXROTH HDS04.2-W200N-HA36-01-FW如果用戶設置損壞或不符合健全性檢查，則可以使用此功能。有關Flash/PROM默認值，請參閱ENV命令（第5章）。位#2（GPI2）11-12保留供將來使用。位#3（GPI3）9-10設置為0（低）時，通知調試器它正在閃存中執行。當設置為1（高）時，如在沒有VMEbus模型中設置的那樣，通知調試器它正在PROM之外執行。Bit#4（GPI4）7-8對應用程序開放。Bit#5（GPI5）5-6對應用程序開放。Bit#6（GPI6）3-4對應用程序開放。Bit#7（GPI7）1-2對您的應用程序開放。請注意，當REXROTH HDS04.2-W200N-HA36-01-FW控制器冷復位時，162Bug將在Board Mode（板模式）下運行。使用環境（ENV）或菜單命令可以使162Bug在系統模式下運行。有關更多信息，請參閱第5章。2.通過在針腳1和針腳2之間安裝/拆卸跳線來配置收割臺J1。安裝/拆除跳線可啟用/禁用REXROTH HDS04.2-W200N-HA36-01-FW的系統控制器功能。在收割臺J1的針腳1和針腳2之間安裝/拆卸跳線可選擇“自動”系統控制器功能。
This feature can be used in the event the user setup is corrupted or does not meet a sanity check. Refer to the ENV command (Chapter 5) for the Flash/PROM defaults. Bit #2 (GPI2) 11-12 Reserved for future use. Bit #3 (GPI3) 9-10 When set to 0 (low), informs the debugger that it is executing out of the Flash memory. When set to 1 (high), as set in no-VMEbus models, informs the debugger that it is executing out of the PROM. Bit #4 (GPI4) 7-8 Open to your application. Bit #5 (GPI5) 5-6 Open to your application. Bit #6 (GPI6) 3-4 Open to your application. Bit #7 (GPI7) 1-2 Open to your application.Note that when the REXROTH HDS04.2-W200N-HA36-01-FW controller comes up in a cold reset, 162Bug runs in Board Mode. Using the Environment (ENV) or MENU commands can make 162Bug run in System Mode. Refer to Chapter 5 for additional information. 2. Configure header J1 by installing/removing a jumper between pins 1 and 2. A jumper installed/removed enables/disables the system controller function of the REXROTH HDS04.2-W200N-HA36-01-FW. Installing/removing a jumper between pins 1 and 2 of header J1 selects the “automatic” system controller function.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
