REXROTH NFD03.1-480-055伺服控制系統
1.產 品 介 紹
品牌：REXROTH
型號說明：REXROTH NFD03.1-480-055伺服控制系統
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
VMEbus上的其他MPU可以中斷、禁用、與處理器通信并確定處理器的操作狀態。GCSR（全局控制/狀態寄存器）集合的一個寄存器包括四個位，這些位用作位置監視器，以允許一個REXROTH NFD03.1-480-055處理器向任何其他MVME162FX處理器廣播信號。所有八個寄存器均可從任何本地處理器以及VMEbus訪問。REXROTH NFD03.1-480-055通過位于J4附近的1A保險絲（F1）向遠程LED/開關連接器（J4）提供+5 Vdc電源。接頭J4是遠程控制和指示面板的接口。如果LED都不亮，且ABORT和RESET開關不工作，檢查保險絲F1。REXROTH NFD03.1-480-055通過位于二極管CR1附近的1A保險絲（F2）向以太網收發器接口提供+12 Vdc電源。FUSE LED燈指示+12 Vdc可用。使用MVME712M模塊時，當LAN電源可用時，REXROTH NFD03.1-480-055上的黃色DS1 LED點亮，這表明保險絲良好。如果以太網收發器無法工作，請檢查保險絲F2。
Other MPUs on the VMEbus can interrupt, disable, communicate with, and determine the operational status of the processor(s). One register of the GCSR (global control/status register) set includes four bits that function as location monitors to allow one REXROTH NFD03.1-480-055 processor to broadcast a signal to any other MVME162FX processors. All eight registers are accessible from any local processor as well as from the VMEbus. The MVME162FX provides +5 Vdc power to the remote LED/switch connector (J4) through a 1A fuse (F1) located near J4. Connector J4 is the interface for a remote control and indicator panel. If none of the LEDs light and the ABORT and RESET switches do not operate, check fuse F1. TheREXROTH NFD03.1-480-055 provides +12 Vdc power to the Ethernet transceiver interface through a 1A fuse (F2) located near diode CR1. The FUSE LED lights to indicate that +12 Vdc is available. When the MVME712M module is used, the yellow DS1 LED on the REXROTH NFD03.1-480-055 illuminates when LAN power is available, which indicates that the fuse is good. If the Ethernet transceiver fails to operate, check fuse F2.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
