RELIANCE 57C-435數字量輸入卡件
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 57C-435數字量輸入卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE 57C-435安裝新SIMM 1。觀察SIMM接頭J1和控制器接頭J10上接頭鍵的方向。轉動SIMM，使鍵對齊，并將其輕輕地放在連接器J10上，使SIMM角（或中心）處的安裝孔與控制器上的匹配支座對齊。2.輕輕按壓SIMM的頂部，使其位于連接器上。如果SIMM沒有輕輕按壓，則重新檢查方向。如果SIMM連接器方向不正確，安裝孔將不會與支座對齊！注意：為防止損壞SIMM，如果方向不正確，請勿強行打開SIMM。RELIANCE 57C-4353.將一個或兩個（根據需要）4-40 x 3/16“十字頭螺釘（之前已拆除或隨新SIMM一起提供）插入中心或對角安裝孔。將螺釘安裝到支座中，但不要過度擰緊。圖示了端口A和B可用的各種串行配置中的信號關系和信號連接RELIANCE 57C-435
Installation of New SIMM 1. Observe the orientation of the connector keys on the SIMM connector J1 and on the controller connector J10.RELIANCE 57C-435 Turn the SIMM so that the keys are lined up and place it gently on connector J10, aligning the mounting hole(s) at the SIMM corners (or center) with the matching standoff(s) on the controller. 2. Gently press the top of the SIMM to seat it on the connector. If the SIMM does not seat with gentle pressure, recheck the orientation. If the SIMM connector is oriented incorrectly, the mounting hole(s) will not line up with the standoff(s). ! Caution To prevent damage to the SIMM, do not force the SIMM on if it is oriented incorrectly. 3. Insert one or two (as required) 4-40 x 3 /16” phillips-head screw(s) (that were previously removed or supplied with the new SIMM) into the center or opposite corner mounting hole(s). Install the screw(s) into the standoff(s), but do not overtighten.RELIANCE 57C-435The signal relationships and signal connections in the various serial configurations available for ports A and B are illustratedRELIANCE 57C-435
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
