RELIANCE 45C410C工控控制卡件
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 45C410C工控控制卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE 45C410C注意：在沒有可選VMEbus接口（即沒有VMEchip2）的控制器上，可以在不影響正常操作的情況下安裝或移除跳線。MVME162FX的Z85230串行通信控制器的IMM選擇端口B可通過安裝在控制器連接器J10上的串行接口模塊（SIMM）進行配置。提供五個串行接口模塊：? EIA-232-D（DCE和DTE）? EIA-530（DCE和DTE）? EIA-485/EIA-422（DCE或DTE）通過安裝適當的串行接口模塊，您可以將端口B從EIA-232-D更改為EIA-530接口或EIA-485/IIA-422接口（反之亦然）。端口B（通過J10處的SIMM）連接到標有串行端口2的25針DB25前面板連接器。控制器上SIMM連接器J10的位置見圖2-1。RELIANCE 45C410C圖2-2顯示了串行接口模塊的次級（底部）側，顯示了插入控制器上SIMM連接器J10的J1連接器。圖2-3（表3-6）、圖2-4、圖2-5（表3和4）和圖2-6說明了端口B可用的九種配置。RELIANCE 45C410C
Note On controllers without the optional VMEbus interface (i.e., no VMEchip2), the jumper may be installed or removed without affecting normal operation.SIMM Selection Port B of the MVME162FX’s Z85230 serial communications controller is configurable via a serial interface module (SIMM) which is installed at connector J10 on the controller. Five serial interface modules are available:RELIANCE 45C410C? EIA-232-D (DCE and DTE) ? EIA-530 (DCE and DTE) ? EIA-485/EIA-422 (DCE or DTE) You can change Port B from an EIA-232-D to an EIA-530 interface or to an EIA-485/EIA-422 interface (or vice-versa) by installing the appropriate serial interface module. Port B is routed (via the SIMM at J10) to the 25- pin DB25 front panel connector marked SERIAL PORT 2. Refer to Figure 2-1 for the location of SIMM connector J10 on the controller. Figure 2-2 illustrates the secondary (bottom) side of a serial interface module, showing the J1 connector which plugs into SIMM connector J10 on the controller. Figure 2-3 (sheets 3-6), Figure 2-4, Figure 2-5 (sheets 3 and 4), and Figure 2-6 illustrate the nine configurations available for Port B.RELIANCE 45C410C
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
