RELIANCE 57C424高速鏈路
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 57C424高速鏈路
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE 57C424開箱說明！注意：為防止靜電放電損壞控制器，請避免觸摸電路板的表面和部件。靜電放電會損壞集成電路和其他靜電敏感元件。注意：如果裝運紙箱在收到時損壞，請在開箱和檢查設備時要求承運人的代理人在場。將設備從裝運紙箱中取出。參考裝箱單，確認所有項目都存在。保存包裝材料，以便儲存和重新裝運設備。將設備放置在清潔且充分保護的工作表面上。硬件準備2為了確保RELIANCE 57C424嵌入式控制器的正常運行，安裝前可能需要對某些選項進行修改。控制器為大多數這些選項提供軟件控制。在控制器安裝在系統中之后，通過在控制寄存器中設置位來執行修改。有關RELIANCE 57C424寄存器的更多信息，請參閱附錄F中列出的《RELIANCE 57C424Embedded Controller編程器參考指南》。注意，某些選項無法在軟件中設置；可通過安裝或移除接頭跳線或接口模塊對其進行修改。
Unpacking Instructions ! Caution To prevent static discharge damage to the controller, avoid touching the surface and components of the circuit board. Static discharge can damage integrated circuits and other static sensitive components. Note If the shipping carton is damaged upon receipt, request the carrier’s agent to be present during unpacking and inspection of equipment. Unpack the equipment from the shipping carton. Refer to the packing list and verify that all items are present. Save the packing material for storing and reshipping the equipment. Place the equipment on a clean and adequately protected working surface.Hardware Preparation 2 To ensure proper operation of the RELIANCE 57C424 Embedded Controller, modifications to certain options may be necessary before installation. The controller provides software control for most of these options. Modifications are performed by setting bits in control registers after the controller has been installed in a system. For additional information onRELIANCE 57C424registers, refer to the RELIANCE 57C424 Embedded Controller Programmer’s Reference Guide listed in Appendix F. Note that Some options cannot be set in the software; these are modified by installing or removing header jumpers or interface modules.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
