RELIANCE 0-51385數字量控制板卡
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 0-51385數字量控制板卡
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
連接器RELIANCE 0-51385嵌入式控制器有兩個96位DIN連接器：P1和P2。P1行A、B、C和P2行B提供VMEbus互連。P2行A和C提供到SCSI總線、串行端口和以太網的連接。控制器上的串行端口還連接到前面板上的兩個25針DB-25陰連接器J9和J15。四個IP通過四對50針連接器連接到控制器。前面板后面的四個50針連接器用于與IP信號的外部連接。內存芯片夾層板插入兩個40針連接器。遠程狀態和控制遠程狀態和控制器連接器J4是一個位于控制器前面板后面的20針連接器。RELIANCE 0-51385它為系統設計者提供了訪問關鍵指示器和重置功能的靈活性。當控制器封裝在機箱中且前面板不可見時，此連接器允許將RESET（重置）、ABORT（中止）和LED（發光二極管）功能擴展到系統的控制面板，使其可見。或者，這允許系統設計者構建一個RESET/ABORT/LED面板，該面板可以位于遠離控制器的位置。RELIANCE 0-51385
Connectors The RELIANCE 0-51385 Embedded Controller has two 96-position DIN connectors: P1 and P2. P1 rows A, B, C, and P2 row B provide the VMEbus interconnection. P2 rows A and C provide the connection to the SCSI bus, serial ports, and Ethernet. The serial ports on the controller are also connected to two 25-pin DB-25 female connectors J9 and J15 on the front panel. The four IPs connect to the controller by four pairs of 50-pin connectors. Four 50-pin connectors behind the front panel are for external connections to IP signals. The memory chip mezzanine board is plugged into two 40-pin connectors. Remote Status and Control The remote status and control connector, J4, is a 20-pin connector located behind the front panel of the controller.RELIANCE 0-51385 It provides system designers with flexibility in accessing critical indicator and reset functions. When the controller is enclosed in a chassis and the front panel is not visible, this connector allows the RESET, ABORT, and LED functions to be extended to the control panel of the system, where they are visible. Alternatively, this allows a system designer to construct a RESET/ABORT/LED panel that can be located remotely from the controller.RELIANCE 0-51385
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
