A-B 1326AB-B410G-21-L伺服驅動
1.產 品 介 紹
品牌：A-B
型號說明：A-B 1326AB-B410G-21-L伺服驅動
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
A-B 1326AB-B410G-21-L有關IP接口的詳細信息，請參閱《A-B 1326AB-B410G-21-L嵌入式控制器程序員參考指南》中的IP2芯片編程模型。有關IP連接器的引腳分配，請參閱附錄B。注意：A-B 1326AB-B410G-21-L嵌入式控制器不會監控電源+5Vdc電源，如果電源過低，則會斷言IP重置。相反，IP重置由162Bug調試器的ENV命令處理，如第5章所述。插入同一A-B 1326AB-B410G-21-L嵌入式控制器的兩個IP模塊不能使用Strobe*線相互通信，因為Strobe*信號是IP2芯片向插入同一控制器的所有四個IP模塊的輸出。可選LAN以太網接口MVME162FX嵌入式控制器使用82596CA實現以太網收發器接口。82596CA使用DMA操作訪問本地RAM以執行其正常功能。由于82596CA具有較小的內部緩沖區，并且VMEbus具有未定義的等待時間，如果DMA被編程為訪問VMEbus，則可能會發生緩沖區溢出。因此，82596CA不應編程為訪問VMEbus。
Refer to the IP2 chip Programming Model in the A-B 1326AB-B410G-21-L Embedded Controller Programmer’s Reference Guide for details of the IP interface. Refer also to Appendix B for the pin assignments of the IP connectors. Notes A-B 1326AB-B410G-21-L Embedded Controllers do not monitor power supply +5 Vdc power and assert IP reset if the power falls too low. Instead, IP reset is handled by the ENV command of the 162Bug debugger, as described in Chapter 5. Two IP modules plugged into the same MVME162FX Embedded Controller can not use the Strobe? line to communicate with each other, because the Strobe? signal is an output from the IP2 chip to all four IP modules that plug into the same controller.Optional LAN Ethernet Interface The MVME162FX Embedded Controller uses the 82596CA to implement the Ethernet transceiver interface. The 82596CA accesses local RAM using DMA operations to perform its normal functions. Because the 82596CA has small internal buffers and the VMEbus has an undefined latency period, buffer overrun may occur if the DMA is programmed to access the VMEbus. Therefore, the 82596CA should not be programmed to access the VMEbus.A-B 1326AB-B410G-21-L
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
