RELIANCE 45C363數字量輸入卡件
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 45C363數字量輸入卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE 45C363第2章中的（表1和表2）說明了當控制器與RELIANCE 45C363一起使用時端口A可用的兩種配置。圖2-5（表1和表2）顯示了當控制器RELIANCE 45C363使用時，端口A可用的兩種配置。RELIANCE 45C363串行端口2 Z85230的B端口配置通過安裝在控制器連接器J10上的串行接口模塊（SIMM）確定。有五個SIMMS可用：標記為SERIAL PORT 2的DB-9連接器或前面板上的RJ-11插孔。串行端口2硬接線為EIA-232-D DTE；RJ-11插孔使用內置調制解調器。在RELIANCE 45C363上設置跳線頭J16和J17可將輸出配置為串行端口2處的EIA-232-D DTE或RJ-11插孔處的調制解調器。DB-9連接器在前面板上標記為串行端口1。串行端口2硬接線為EIA-232-D DTE端口。DB-25連接器在前面板上標記為串行端口2。串行端口2可以通過跳線頭J16和J17配置為EIA-232-D DTE或DCE端口。RELIANCE 45C363
(sheets 1 and 2) in Chapter 2 illustrates the two configurations available for Port A when the controller is used with an MVME712M. Figure 2-5 (sheets 1 and 2) shows the two configurations available for Port A when the controller is used RELIANCE 45C363. MVME162FX Serial Port 2 The configuration of B port of the RELIANCE 45C363 is determined via a Serial Interface Module (SIMM) which is installed at connector J10 on the controller. There are five SIMMS available:The DB-9 connector marked SERIAL PORT 2 OR the RJ-11 jack on the front panel. SERIAL PORT 2 is hardwired as EIA-232-D DTE; the RJ-11 jack utilizes the built-in modem. Setting the jumper headers J16 and J17 on the MVME712AM/-13 configures the output as EIA-232-D DTE at SERIAL PORT 2 or as a modem at the RJ-11 jack.The DB-9 connector marked SERIAL PORT 2 on the front panel. SERIAL PORT 2 is hardwired as an EIA-232-D DTE port.The DB-25 connector marked SERIAL PORT 2 on the front panel. SERIAL PORT 2 can be configured as an EIA-232- D DTE or DCE port, via jumper headers J16 and J17.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
