RELIANCE S-25004-1模塊卡件
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE S-25004-1模塊卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE S-25004-1模塊卡件安裝新電池之前，請確保電池針腳清潔。記下電池極性，然后將電池壓入插座。注意，當電池在插座中時，不需要焊接。EPROM和閃存MVME162FX嵌入式控制器的設計包含1MB閃存（一個8Mbit閃存設備，組織為1M x 8）。有關閃存編程的更多信息，請參閱附錄F中列出的Intel文檔。閃存寫入啟用由MC2芯片中閃存訪問時間控制寄存器中的一位控制。有關更多信息，請參閱《MVME162FX嵌入式控制器程序員參考指南》。RELIANCE S-25004-1模塊卡件位置是一個標準JEDEC 32引腳PLCC，能夠以512KB x 8器件的形式組織4 Mbit密度。根據跳線設置（GPI3，J22上的引腳9-10），可以從閃存（已安裝GPI3）或EPROM（已移除GPI3）獲取MC68xx040重置代碼。RELIANCE S-25004-1模塊卡件
Before installing a new battery, ensure that the battery pins are clean. Note the battery polarity and press the battery into the socket. Note that when the battery is in the socket, no soldering is required. EPROM and Flash The MVME162FX Embedded Controller’s design incorporates 1MB of flash memory (an 8-Mbit flash device organized as a 1M x 8). RELIANCE S-25004-1模塊卡件Refer to the Intel documents listed in Appendix F for additional information on programming flash memory, The flash write enable is controlled by a bit in the Flash Access Time Control Register in the MC2 chip. Refer to the MVME162FX Embedded Controller Programmer’s Reference Guide for additional information. The EPROM location is a standard JEDEC 32-pin PLCC capable of 4 Mbit densities organized as a 512KB x 8 device. Depending on the jumper setting (GPI3, pins 9-10 on J22), the MC68xx040 reset code can be fetched from either the flash (GPI3 installed) or EPROM (GPI3 removed).RELIANCE S-25004-1模塊卡件
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
