RELIANCE 86466-74RB整流器組
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 86466-74RB整流器組
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE 86466-74RB對于高溫操作，用戶必須進行類似的測量和計算，以確定任何特定環境下的操作裕度。以下是用戶可以采取的一些步驟，以幫助實現高溫操作：1。將RELIANCE 86466-74RB嵌入式控制器放置在機箱中，以使電路板組件側的氣流達到最大。2.避免將高功耗板放置在控制器附近。3.僅使用低功耗工業封裝模塊。IP模塊的首選位置是位置a（J2和J3）和位置d（J18和J19）。EMC合規性RELIANCE 86466-74RB控制器是板級產品，用于標準VME應用。因此，系統集成商有責任滿足與給定應用相關的監管指南。控制器已在具有代表性的底盤上進行了CE B級EMC認證測試。EMC合規性是在以下條件下實現的：1。所有外部I/O端口上的屏蔽電纜。RELIANCE 86466-74RB
For elevated temperature operation, the user must perform similar measurements and calculations to determine what operating margin exists for any specific environment. The following are some steps that the user can take to help make elevated temperature operation possible: 1. Position the RELIANCE 86466-74RB Embedded Controller in the chassis for maximum air flow over the component side of the board. 2. Avoid placing boards with high power dissipation adjacent to the controller. 3. Use low power Industry Pack modules only. The preferred locations for IP modules are position a (J2 and J3) and position d (J18 and J19).EMC Compliance TheRELIANCE 86466-74RB controller is a board-level product and is meant to be used in standard VME applications. As such, it is the responsibility of system integrators to meet the regulatory guidelines pertaining to a given application. The controller has been tested in a representative chassis for CE class B EMC certification. EMC compliance was achieved under the following conditions: 1. Shielded cables on all external I/O ports.RELIANCE 86466-74RB
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
