RELIANCE 801429-5SE控制主板卡件
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 801429-5SE控制主板卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料： RELIANCE 801429-5SE
RELIANCE 801429-5SE控制器的設計使用商業級設備。因此，它可以在環境空氣溫度從0°C到70°C的環境中運行。有許多因素會影響控制器上的組件感受到的環境溫度：進氣溫度；氣流特性；Industry Pack模塊的數量、類型和位置；RELIANCE 801429-5SE12槽VME機箱中開發了RELIANCE 801429-5SE嵌入式控制器RELIANCE 801429-5SE的實驗室溫度曲線。該控制器配備有一個GreenSpring IP雙P/T模塊（位置a）和三個GreenSpring IP-488模塊（位置b、c和d）。25瓦負載板安裝在被測控制器的每一側附近。控制器和IP雙P/T模塊之間的出口空氣速度約為200 LFM。在這些情況下，觀察到入口和出口空氣之間升高了10°C。在出口空氣溫度為70°C（入口空氣溫度為60°C）時，計算控制器上裝置的連接溫度（根據測量的外殼溫度），且不超過100°C。RELIANCE 801429-5SE
The controller’s design uses commercial grade devices. Therefore, it can operate in an environment with ambient air temperature from 0° C to 70° C. There are many factors that affect the ambient temperature felt by components on the controller: inlet air temperature; air flow characteristics; number, types, and locations of Industry Pack modules; power dissipation of adjacent boards in the system, etc. A laboratory temperature profile of the MVME162FX Embedded ControllerRELIANCE 801429-5SE was developed in an MVME945 12-slot VME chassis. This controller was equipped with one GreenSpring IP-Dual P/T module (position a) and three GreenSpring IP-488 modules (positions b, c, and d). A 25 watt load board was installed adjacent to each side of the controller under test. The exit air velocity was approximately 200 LFM between the controller and the IP-Dual P/T module. Under these circumstances, a 10° C rise between the inlet and exit air was observed. At 70° C exit air temperature (60° C inlet air), the junction temperatures of devices on the controller were calculated (from the measured case temperatures) and did not exceed 100° C.RELIANCE 801429-5SE
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
