RELIANCE 0-54339-6工控控制卡件
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 0-54339-6工控控制卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE 0-54339-6這是通過以100 CFM軸流風扇通常可達到的速度強制空氣冷卻實現的。溫度鑒定在標準摩托羅拉VME系統底盤中進行。25瓦負載板插入兩個卡槽（每側一個），與被測板相鄰，以模擬高功率密度系統配置。一個由三個軸流風扇組成的組件，每個風扇的額定功率為100 CFM，直接放置在VME卡罩的下方。在風扇組件和卡罩之間測量進氣溫度，其中進氣氣流首先遇到被測控制器。RELIANCE 0-54339-6當控制器受到環境溫度變化時，執行測試軟件。監控關鍵、高功率密度集成電路的外殼溫度，以確保不超過組件供應商的規范。RELIANCE 0-54339-6
This is accomplished with forced air cooling at a velocity typically achievable by a100 CFM axial fan. Temperature qualification is performed in a standard Motorola VME system chassis. 25 watt load boards are inserted in two card slots (one on each side), RELIANCE 0-54339-6adjacent to the board under test, to simulate a high power density system configuration. An assembly of three axial fans, rated at 100 CFM per fan, is placed directly under the VME card cage. The incoming air temperature is measured between the fan assembly and the card cage, where the incoming airstream first encounters the controller under test. Test software is executed as the controller is subjected to ambient temperature variations. Case temperatures of critical, high power density integrated circuits are monitored to ensure the component vendor’s specifications are not exceeded.RELIANCE 0-54339-6
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
