RELIANCE DM150工控控制卡件
1.產 品 介 紹
品牌:RELIANCE
型號說明:RELIANCE DM150工控控制卡件
優勢:供應進口原裝正品,專業停產配件。
公司主營特點:主營產品各種模塊/卡件,控制器,觸摸屏,伺服驅動器。
2.產 品 詳 情 資 料:
RELIANCE DM150通過診斷顯示器或菜單“詳細錯誤顯示”(參見操作系統文檔)或編程設備與PES之間的通信開始后,可通過2個按鈕調用錯誤。8.6.5啟動編程設備和PES之間的通信。關于編程設備與PES之間通信的構建和啟動,請參閱文件用戶手冊ELOP II和用戶手冊資源類型。通信故障可通過數據通信監控、記錄和分析程序進行檢查(請參閱手冊“RELIANCE DM150)。常數、參數和定時器設置點的更改請參閱用戶手冊ELOP II。8.7.2程序變更——參考用戶手冊ELOP II。8.8維護注意事項:電源線、信號線和數據線的維護只能由合格人員在考慮所有ESD保護措施的情況下進行。直接接觸該線路時,必須對維護人員進行靜電放電!HIMA PES專為惡劣的工業條件而設計。電子元件在初始運行階段(約500至1000小時)后的故障率非常低。在工廠的功能測試過程中和系統投入運行時,已經達到了初始運行時間。RELIANCE DM150
Errors can be called via 2 buttons via the diagnostic display or via the menu "Detailed Error Display" (refer to the documentation of the operating system) or after the start of the communication between programming device and PES. 8.6.5 Starting theRELIANCE DM150 Communication between Programming Device and PES For construction and startup of the communication between progamming device and PES refer to the documentations user manual ELOP II and user manual resource type. Communication faults can be checked with help of a program for monitoring, logging and analizing of the data communication (refer to manual RELIANCE DM150).Alterations of Constants, Parameters and Set Points of Timers Refer to the user manual ELOP II. 8.7.2 Alterations of the Program Refer to the user manual ELOP II. 8.8 Maintenance Attention: Maintenance on supply, signal and data lines may only be executed by qualified personnel with consideration off all ESD protection measures. With direct contact of this lines the maintenance personnel have to be electrostatic discharged! HIMA PES are designed for tough industrial conditions. Electronic elements have a very low failure rate after the initial operating phase of approx. 500 to 1000 h. This initial operating time is already attained in the course of functional tests at the factory and when putting the system into operation.RELIANCE DM150
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn