RELIANCE 45C15C工控控制卡件
1.產 品 介 紹
品牌:RELIANCE
型號說明:RELIANCE 45C15C工控控制卡件
優勢:供應進口原裝正品,專業停產配件。
公司主營特點:主營產品各種模塊/卡件,控制器,觸摸屏,伺服驅動器。
2.產 品 詳 情 資 料:
RELIANCE 45C15C有關I/O總線的構造,請參閱B 9302裝配套件和H41q裝配套件的數據表。輸入/輸出機架本身沒有代碼。您只需注意模塊和相應電纜連接器的正確位置。必須檢查現有保險絲模塊(包括保險絲)的完整性。還應檢查24 V電源是否正確分配給需要通過后總線饋電的此類模塊的插槽。8.6.4接通HIMA PES。連接工作電壓后,如果用戶程序已加載且系統中未發現錯誤,RELIANCE 45C15C PES將進入運行狀態。如果顯示STOP(停止),則存在錯誤。只有在糾正錯誤后,例如設置正確的開關位置或跳線、正確的連接線,或可能在更換模塊后,才開始運行操作。RELIANCE 45C15C
For the construction of the I/O bus refer to the data sheets of the B 9302 assembly kit and of the H41q ass. kits. The input/output racks themselves have no code. You only have to pay attention to the correct position of the module and the corresponding cable connector. The existing fuse modules including fuses have to be checked for completeness. RELIANCE 45C15CAlso check the correct assignment of the 24 V supply to the slots of such modules which need the feeding via the rear bus. 8.6.4 Switching on the HIMA PES After the operating voltage has been connected, the HIMA PES goes into RUN operation, if the user program has been loaded and no error has been found in the system. If STOP is displayed there is an error. Only after the correction of the error, e.g. setting the correct switch position or jumper, correct connecting lines, or possibly after the exchange of a module etc. is the RUN operation started.RELIANCE 45C15C
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn