REXROTH MAC090B-0-PD-4-C伺服電機
1.產 品 介 紹
品牌：REXROTH
型號說明：REXROTH MAC090B-0-PD-4-C伺服電機
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
REXROTH MAC090B-0-PD-4-C機械結構和設計19英寸和5個單元高的中央機架，帶有集成風扇單元。有關機械結構的詳細信息和設計，請參見B 5231組裝套件的數據表。4.5.6 24 V直流電源和配電24 V直流電可向H51q MS系統供電三次（另見B 5231裝配套件、接線裝配套件）。REXROTH MAC090B-0-PD-4-C4.5.7 5V直流電源和配電5V直流電源不必額外布線，因為它已經是安裝的一部分。為向I/O機架供電，中央機架后側提供了具有相應GND的5V DC電源。微處理器系統所需的5 V DC電源以及I/O模塊的控制電流由系統的24 V DC電源通過帶有F 7126標識的時鐘24 V DC/5 V DC供電模塊產生。一個中央機架最多可配備3個電源模塊。電源模塊并聯切換。一個或兩個電源模塊通常能夠為PES供電。另一個電源模塊用于提高可用性。
Mechanical Structure and Design The 19 inch and 5 units high central rack with integrated fan unit. For details and design of the mechanical structure see data sheet of the B 5231 assembly kit. 4.5.6 24 V DC Supply and Distribution The 24 V DC power may fed three times to the system H51q-MS (see also B 5231 assembly kit, wiring assembly kit). 4.5.7 5 V DC Supply and Distribution The 5 V DC power supply does not have to be wired extra as it is already part of the installation. To supply the I/O racks the 5V DC power supply with corresponding GND is available at the rear side of the central rack. The 5 V DC power needed for the microprocessor system and as control current for the I/O modules is generated from the 24 V DC power of the system via clocked 24 V DC / 5 V DC power supply modules bearing the F 7126 identification. One central rack can be equipped with a maximum of 3 power supply modules. The power supply modules are switched in parallel. One or two power supply modules are usually able to supply the PES. A further power supply module is used to increase availability.REXROTH MAC090B-0-PD-4-C
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.關 于 相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
