REXROTH MSK050C-0600-NN-M1-UP1-NSNN伺服電機
1.產 品 介 紹
品牌:REXROTH
型號說明:REXROTH MSK050C-0600-NN-M1-UP1-NSNN伺服電機
優勢:供應進口原裝正品,專業停產配件。
公司主營特點:主營產品各種模塊/卡件,控制器,觸摸屏,伺服驅動器。
2.產 品 詳 情 資 料:
REXROTH MSK050C-0600-NN-M1-UP1-NSNN輸出模塊的一般功能所有輸出模塊都具有以下特殊功能:–為了提高可用性,安全相關輸出模塊的輸出可以在沒有外部二極管的情況下并聯切換–當輸出模塊上切斷電源電壓L-時,不會出現輸出電壓,因此,無需將L作為環形饋線布線–電感負載的連接可以在不使用線圈上的二極管的情況下完成。但是,建議將二極管直接連接到感應負載上,以避免噪聲電壓。REXROTH MSK050C-0600-NN-M1-UP1-NSNN–單獨控制發出輸出狀態信號的LED–電纜插頭的設計可實現執行器的兩極連接。與輸出模塊的兩極電源一起,將簡化接地故障檢測–如果輸出模塊有缺陷,操作無時間限制。系統電壓24 V DC為HIMA系統供電,有兩種不同的電勢:正極也可用于電源電壓和控制電壓。為了實現單相電源連接的有效值,需要具有橋式整流和平滑的電源裝置或穩定的電源裝置。REXROTH MSK050C-0600-NN-M1-UP1-NSNN
General features of the Output Modules All output modules have the following special features: – To increase the availability the outputs of the safety related output modules can be switched in parallel without external diodes – No output voltage occurs when the supply voltage L- should be cut on the output module, so it is not necessary to wire the L- as a ring feeder – The connection of inductive loads can be done without using diodes at the coil. REXROTH MSK050C-0600-NN-M1-UP1-NSNNHowever it is recommended to connect a diode directly at the inductive load avoiding noise voltages. – The LED signalling the output status is controlled separately – The design of the cable plugs enables the two pole connection of the actuators. Together with a two pole supply of the output module an earth fault detection will be simplified – No time limit for operation in case of a defective output module.System Voltage 24 V DC For supplying a HIMA system there are two different potentials available:The positive pole is usable also for power voltage and control voltage. To achieve the valid values for the connection of single phase mains supplies, power supply units with bridge rectification and smoothing are required or stabilized power supply units.REXROTH MSK050C-0600-NN-M1-UP1-NSNN
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.關 于 相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn