A-B 842E-CM-MIP3BA編碼器
1.產 品 介 紹
品牌:A-B
型號:A-B 842E-CM-MIP3BA
產品說明:編碼器
優勢:供應進口原裝正品,專業停產配件。
2.產 品 詳 情 資 料:
A-B 842E-CM-MIP3BA本附錄描述了Series 90-30離散I/O模塊的可選接線板組件。該系統稱為接線板快速連接(TBQC)系統。該系統的優點在于,它允許將列出的離散I/O模塊快速連接到TBQC接線板。在該系統中,TBQC接線板(如下圖所示)卡在標準DIN導軌上。然后,在接線板的連接器和I/O模塊的連接器之間連接工廠制造的電纜。使用適配器面板將具有端子板而不是連接器的I/O模塊轉換為連接器類型。TBQC系統不建議與模擬模塊一起使用,因為它不符合模擬模塊連接的屏蔽建議。A-B 842E-CM-MIP3BA(有關模擬模塊接線信息,請參閱GFK-0898系列90-30 PLC I/O模塊規格手冊。)本附錄包含兩部分,一部分用于離散16點I/O模塊,另一部分用于分立32點I/O模塊。16點模塊的接線板快速連接組件安裝16點模塊通常需要2 1/2小時才能將PLC連接到接線板或接線板。使用TBQC,您只需將接線板卡入DIN導軌,卸下I/O模塊的端子組件,卡入I/O面板,然后連接電纜A-B 842E-CM-MIP3BA。
This appendix describes the optional terminal block components for Series 90-30 discrete I/O modules. This system is referred to as the Terminal Block Quick Connect (TBQC) system.A-B 842E-CM-MIP3BAThe advantage of this system, is that it allows the listed discrete I/O modules to be quickly connected to TBQC terminal blocks. In this system, the TBQC terminal block (shown below) is snapped onto a standard DIN-rail. Then, a factory-made cable is connected between the terminal block’s connector and the I/O module’s connector. An I/O module that has a terminal board instead of a connector is converted into a connector type using an adapter faceplate. The TBQC A-B 842E-CM-MIP3BAsystem is not recommended for use with Analog modules because it does not meet the shielding recommendations for Analog module connections. (See the Series 90-30 PLC I/O Module Specifications Manual, GFK-0898, for Analog module wiring information.) This appendix contains two sections, one for discrete 16-point I/O modules and one for discrete 32- point I/O modules.Terminal Block Quick Connect Components for 16-Point Modules Installing a 16 point module typically takes 2 1/2 hours to wire from a PLC to a terminal blocks or strip. With the TBQC, you simply snap the terminal block onto a DIN rail, remove the I/O module’s terminal assembly, snap in the I/O faceplate, and connect the cable.A-B 842E-CM-MIP3BA
3.產 品 展 示
4.公 司 優 勢
5.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn