NI PXIe-8115嵌入式控制器
1.產 品 介 紹
品牌:NI
型號:NI PXIe-8115
產品說明:嵌入式控制器
優勢:供應進口原裝正品,專業停產配件。
2.產 品 詳 情 資 料:
NI PXIe-8115電纜說明與Series 90-70 PLC(見圖B-1)的串行連接通過6英尺(2米)串行接口電纜NI PXIe-8115連接到RS-422/RS-485兼容串行端口連接器,該連接器位于鉸鏈門后面的CPU模塊底部。布線信息以及推薦的電纜和連接器提供給那些可能希望構建自己的不同長度電纜的人。Series 90-30 PLC的串行連接通過相同的6英尺串行接口電纜NI PXIe-8115或等效電纜連接到位于電源右前方鉸鏈門后面的RS-485兼容串行端口連接器,圖B-2)。RS-232接口引腳分配RS-232接口的引腳分配和信號定義列于RS-422/RS-485接口引腳分配RS-422/RRS-485接口的引腳配置和信號定義如下。NI PXIe-8115跳線配置轉換器板上有三個跳線位置,用于選擇用戶選項。如下圖所示,每個跳線位置有三個引腳。
Cable Description The serial connection to the Series 90-70 PLC (see Figure B-1) is to the RS-422/RS-485 compatible serial port connector, located at the bottom of the CPU module behind the hinged door, through a 6 foot (2 meter) serial interface cable, NI PXIe-8115. Wiring information and recommended cable and connectors are provided for those who may want to build their own cable having a different length. The serial connection to the Series 90-30 PLC is to the RS-485 compatible serial port connector located behind the hinged door on the right front of the power supply, through the same 6 foot serial interface cable,NI PXIe-8115 or equivalent, Figure B-2).RS-232 Interface Pin Assignments Pin assignments and signal definitions for the RS-232 interface are listed below RS-422/RS-485 Interface Pin Assignments Pin assignments and signal definitions for the RS-422/RS-485 interface are listed below.Jumper Configuration There are three jumper locations on the converter board for selection of user options. Each jumper position has three pins, as shown in the following illustration.NI PXIe-8115
3.產 品 展 示
4.公 司 優 勢
5.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn