NI PXIe-5665矢量信號分析儀
1.產 品 介 紹
品牌：NI
型號：NI PXIe-5665
產品說明：矢量信號分析儀
優勢：供應進口原裝正品，專業停產配件。
2.產 品 詳 情 資 料：
NI PXIe-5665將該電纜另一端的母連接器（9針或25針）連接到所選編程（或其他串行）設備上的RS-232公連接器（串行端口）。如果您自己制作電纜，請使用與串行設備兼容的連接器。請注意，6英尺RS-422/RS-485兼容電纜的兩端是相同的；15針公連接器連接在兩端。將該電纜的一端連接到轉換器上RS-422/RS-485連接器上的15針母連接器。將該電纜另一端連接到15針母接頭，NI PXIe-5665該接頭連接到Series 90-30或Series 90-70 PLC上的RS485兼容串行端口。對于Series 90-30 PLC，可通過打開電源上的鉸鏈門來訪問此連接器。NI PXIe-5665Series 90-70 PLC的串行端口連接器位于CPU模塊上，可通過打開模塊上的鉸鏈門進行訪問。
Connect the female connector (9-pin or 25-pin) on the opposite end of this cable to the male RS-232 connector (serial port) on the selected programming (or other serial) device.NI PXIe-5665 If you build you own cable, NI PXIe-5665use a connector that is compatible with your serial device.Notice that both ends of the 6-foot RS-422/RS-485 compatible cable are the same; a 15-pin male connector is attached at both ends. Connect one end of this cable to the 15-pin female connector on the RS-422/RS-485 connector on the converter.Connect the other end of this cable to the 15-pin female connector, which interfaces to the RS485 compatible serial port on the Series 90-30 or Series 90-70 PLC. For the Series 90-30 PLC, this connector is accessed by opening the hinged door on the power supply. The serial port connector for the Series 90-70 PLC is on the CPU module, and is accessed by opening the hinged door on the module.NI PXIe-5665
3.產 品 展 示
4.公 司 優 勢
5.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
