NI PXIe-5601變頻器模塊
1.產 品 介 紹
品牌:NI
型號:NI PXIe-5601
產品說明:變頻器模塊
優勢:供應進口原裝正品,專業停產配件。
快遞方式:國內順豐、德邦、京東快遞包郵,按照實際報價貨期發貨
2.產 品 詳 情 資 料:
NI PXIe-5601變頻器模塊必須注意滿足共模電壓規格。超過規定值的共模條件將導致傳輸錯誤和/或90系列PLC組件損壞。當超過共模電壓規格時,必須使用端口隔離器,NI PXIe-5601。有關此端口隔離器的詳細信息,請參閱附錄E。電纜和連接器規格電纜組件是通信故障的最常見原因之一。為了獲得最佳性能,請根據推薦的連接器零件和規格構造電纜組件。Series 90 PLC串行端口Series 90 PLC串口與RS-422兼容。RS-232到RS-422轉換器需要連接到提供RS-232兼容接口的系統。Series 90 PLC RS-422串行端口為SNP通信提供物理連接。該端口是一個5針D型陰連接器,位于如下位置:顯示了90系列PLC類型的串行端口方向和連接器布局。NI PXIe-5601CPU上的連接器方向從Series 90-30連接器旋轉90度,引腳位于右上方。)NI PXIe-5601表A-2顯示了適用于兩個PLC的引腳編號和信號分配。
Care must be taken that common mode voltage specifications are met. Common mode conditions that exceed those specified will result in errors in transmission and/or damage to Series 90 PLC components. When the common mode voltage specification is exceeded, a port isolator such as theNI PXIe-5601 must be used. See Appendix E for details on this port isolator.Cable and Connector Specifications The cable assembly presents one of the most common causes of communication failure. NI PXIe-5601For best performance construct the cable assemblies according to the recommended connector parts and specifications.Series 90 PLC Serial Port The Series 90 PLC serial port is compatible with RS-422. An RS-232 to RS-422 converter is required to interface to systems that provide RS-232 compatible interfaces. The Series 90 PLC RS-422 serial port provides the physical connection for SNP communication. This port is a 5-pin D-type female connector located as follows:shows the serial port orientation and connector layout for the Series 90 PLC types. (The orientation of the connector on the Series 90-20 CPU is rotated 90 degrees from the Series 90-30 connector with pin to the upper right.) Table A-2 shows the pin numbering and signal assignment applicable to both PLCs.
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.g2813.cn