PROSOFT 5205-DFNT-PDPS以太網交換機
1.產 品 介 紹
品牌：PROSOFT
型號：PROSOFT 5205-DFNT-PDPS
產品說明：以太網交換機
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨
2.產 品 詳 情 資 料：
PROSOFT 5205-DFNT-PDPS以太網交換機每對電線應與熱管綁在一起，以便于識別。例如，應在連接到引腳A1和A2等的黑白線對（1號線對）周圍放置一根高質量熱縮管。該電纜已過時，并由電纜IPROSOFT 5205-DFNT-PDPS（現在也已過時）代替。這兩種電纜之間的唯一區別是電線顏色編碼。當電纜PROSOFT 5205-DFNT-PDPS過時時，這些電纜的替代品變成了PROSOFT 5205-DFNT-PDPS。電纜PROSOFT 5205-DFNT-PDPS具有直接頭。電纜PROSOFT 5205-DFNT-PDPS具有直角連接器。直角連接器在PLC前面需要較少的深度，因此允許在某些應用中使用較小的外殼電纜IPROSOFT 5205-DFNT-PDPS的數據表可在本章中找到。電纜PROSOFT 5205-DFNT-PDPS的連接器深度下圖顯示了當該電纜連接到模塊時，PLC前面所需的空間。安裝PLC的機柜的深度應允許此連接增加的深度
Each pair of wires should be tied together with heat tubing for identification purposes. For example, a hi k piece of heat shrink tubing should be placed around the h t BLACK and WHITE wire pair (Pair #1) that connect to Pins A1 and A2, etc.This cable became obsolete and was replaced by cablePROSOFT 5205-DFNT-PDPS (now obsolete also). The only difference between these two cables is in the wire color coding When cable PROSOFT 5205-DFNT-PDPSbecame obsolete, the replacement for these cables becamePROSOFT 5205-DFNT-PDPS. CablesPROSOFT 5205-DFNT-PDPS have straight connectors. CablesPROSOFT 5205-DFNT-PDPShave right angle connectors. The right angle connectors require less depth in front of the PLC, so allow the use of a smaller enclosure in some application Data sheets for cables PROSOFT 5205-DFNT-PDPS can be found in this chapter. Connector Depth for Cable IC693CBL310 The following illustration shows the space required in front of the PLC when this cable is connected to a module. The depth of the cabinet that the PLC is mounted in should allow for the depth added by this connect
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
