NI PXIE-8840嵌入式控制器
1.產 品 介 紹
品牌：NI
型號：NI PXIE-8840
產品說明：嵌入式控制器
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨
2.產 品 詳 情 資 料：
NI PXIE-8840嵌入式控制器電纜的功能WYE電纜（用于PCM300的IC693CBL304；用于PCM301/311、ADC311、CMM311、AD693CMM301和SLP300的IC693C BL305）隨每個PCM、ADC和CMM模塊提供。WYE電纜用于分離單個物理連接器上的兩個可用端口；電纜將RS-232與RS-485信號分開。此外，NI PXIE-8840WYE電纜允許Series 90-70 PCM使用的電纜與Series 90-30 PCM完全兼容。WYE電纜和電纜連接如下圖所示。每個WYE電纜的長度為1英尺，一端有一個直角陽接頭，用于連接PCM模塊。另一端有一個雙陰連接器，其中一個連接器用于端口1，NI PXIE-8840另一個用于端口2。下圖顯示了WYE電纜上每個連接器的引腳配置。WYE線纜的長度為1英尺，一端具有一個直角陽連接器，連接到PCM模塊。另一端有一個雙陰接頭，一個接頭用于端口1，另一個用于端口2。NI PXIE-8840
Function of cable A WYE cable (IC693CBL304 for PCM300; IC693CBL305 for PCM301/311, ADC311, CMM311, AD693CMM301, and SLP300) is supplied with each PCM, ADC, and CMM module. The WYE cable is used to separate two ports available on a single physical connector;NI PXIE-8840 the cable separates the RS-232 from the RS-485 signals. NI PXIE-8840In addition, the WYE cable allows cables used with the Series 90-70 PCM to be fully compatible with the Series 90-30 PCM. The WYE cable and cable connections are shown below and on the following page. Each WYE cable is 1 foot in length and has a right angle male connector on one end that connects to the PCM module. The other end has a dual female connector with one connector for port 1 and the other for port 2.The following figure shows the pin configuration for each of the connectors on the WYE cable.The WYE cable is 1 foot in length and has a right angle male connector on one end that connects to the PCM module. The other end has a dual female connector with one connector for port 1 and the other for port 2.NI PXIE-8840
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
